Operation Manual

86
and volume control on your television, audio-video receiver, or DVD player. To be able to control the
device, you must adapt the remote control to the device first.
I.
Setup method
1.
Initial Settings
1.1 Device Default: STB
1.2 Remote Control Default Setting Code
1) STB: 001
2) TV: 001
3) DVD: 001
4) AUX: 001
2.
Settings method
2.1 3-DIGIT Setup Method
1) Turn on the device that you want to setup (for example turn on TV)
2) Press and hold [DEVICE] + [OK] button more than 2 seconds until the device
LED blinks.
If there is no key input for 20secnds, the Remote Control will exit the setting mode and return to
normal mode.
3) Enter the 3-Digit setup code from the Brand list. (The LED will blink by Key input)
When the 3-Digit setup code is input, the designated Power Code will be output. (LED blinks)
Verify whether it operated properly by pressing the [Power] button.(If the device does not operate
properly, press next 3-Digit setup code)