Operation Manual

English

7) IP Setting

If the Network supports DHCP , IP settings can be allocated automatically. If the Network

does not support DHCP, the Addresses must enter manually (Static IP).<Figure 6.2.7>

- DHCP Usage : On/Off to receive IP settings automatically

- IP Address : Here enter the IP address

- Subnet Mask : Here enter Subnet Mask Number from your Network

- Gateway : Here enter IP address of Gateway (e.g. router)

- DNS : Here Enter IP address of main DNS Server

- Mac Address : Mac Address display

- Firmware update : Support download from a LAN.

͈ BLUE button, appear input target IP address.

͉ button to connect after input a target IP.

͊ Choose a update software and (OK)button for downloading.

Note : Have to run PC tool before connect PC.

6.2 System Setting

6) Database Reset

This submenu allows you to restore the factory set values (useful when encountering

problems after changing settings). <Figure 6.2.6>

- Delete Radio Channels : Erase all radio channels in the database.

- Delete Scramble Channels : Erase all scramble channels in the database.

- Delete All Channels : Erase all channels.

- Factory Set : Erase all channels and restore the factory default settings.

6.2 System Setting