Operation Manual

English

6.9 Conditional Access System

2) The Status of the Smart Card

You can access detailed information about the Smart Card using the / keys in

the Main Menu to select ‘CA’ and pressing . <Figure 6.9.2>

Proceed with further instructions displayed on the screen to check more detailed

information depending on the Smart Card in use.

Note : Further detailed information is not mentioned in this manual since the

information depends on the Smart Card in use.

6.9 Conditional Access System

1) Card Initializing

To Enjoy CONAX CAS7 scrambled channels, you will need a Smart Card from the service

provider (program distributor). If you are subscribing to services from more than one service

provider, you will need a Smart Card from each one. Since a Smart Card is connected to

a single service provider, a limited range of channels will be available via it.

Note : Without the Smart Card, you can watch only Free-To-Air programs.

Insert the Smart Card into the receiver’s slot designed for it.

The message ‘Smart Card Initializing’ will appear on the screen. <Figure 6.9.1>

After the message ‘Smart Card Initializing’ has disappeared, you will be able to watch

the channels offered by the service provider.