Specifications

12
PARTS IDENTIFICATION
1 ON/OFF Switch
2 Output
current kno
b
Adjusts the cutting current supplied by the machine
according to the thickness of material/speed.
3 Green LED Turns ON when input voltage is applied
blinks slowly when voltage goes above 260V, or below 180V.
4 Amber LED ON when the thermal protection is activated.
5 Red LED Turns ON when torch is triggered. Blinks qu
ickly during 3 second
safety pre-flow prior to pilot arc ignition. Blinks slowly if
cutting arcs not initiated after 3 second pilot arc ignition.
6 Input cord
7 Work cable with clamp
8 Torch (with a trigger security cap)