E AMERICAN-LINCOLN TECHNOLOGY Operator's Manual ENCORE R SCRUBBER Beginning with Serial No. 178575 READ THIS BOOK! This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well. You must have training in the operation of this machine before using it.
TABLE OF CONTENTS Chapter 1 (INSTRUCTIONS) Specifications ....................................................................................................................................... 1-4 Safety Precautions ............................................................................................................................... 1-6 Machine Preparation ............................................................................................................................
TABLE OF CONTENTS Ordering Parts ...................................................................................................................................... 1-29 Hardware Abbreviations ...................................................................................................................... 1-30 Hardware Legend ................................................................................................................................. 1-31 Machine Connection & Harness Routing ....
SPECIFICATIONS SPECIFICATION FOR THE ENCORE R 34” AND 38” POWER SUPPLY Encore R (34”) Encore R (38”) 36 volt (3-12 volt batteries) 228 AH 36 volt (6-6 volt batteries) 340 AH or 370 AH CHARGER Encore R (34” & 38”) 36 Volt output, 115V/60Hz or 230V/50Hz Input MOTORS, VACUUM 1 HP. (.74 kw), 3 stage, tangential discharge MOTORS, BRUSH 1.5 hp (1.11kw) MOTOR, DRIVE 1.5 hp (1.11kw) WHEELS (1) Front 12.0” (31.75 cm) (2) rear 12.0” (31.75 cm) BRUSH SIZE Encore R (34”) Encore R (38”) 2-17” (43.
SPECIFICATIONS Encore R (38”) Machine Brush Housings Squeegee 33.5” (85 cm) 41.0” (104.14 cm) 42.0” (106.68 cm) HEIGHT 51” (129.54 cm) HEIGHT W/OHG 80” (203.2 cm) WEIGHT Encore R (34”) Encore R (38”) 1800 lb. (817.25 kg) 1820 lb. (826.
SAFETY PRECAUTIONS WARNINGS THE FOLLOWING STATEMENTS ARE USED THROUGHOUT THIS MANUAL AS INDICATED IN THEIR DESCRIPTIONS DANGER To warn of immediate hazards which will result in severe personal injury or death. WARNING To warn of hazard or unsafe practices which could result in severe personal injury. CAUTION To warn of hazards or unsafe practices which could result in minor personal injury. ATTENTION To warn of unsafe practices which could result in extensive equipment damage.
SAFETY PRECAUTIONS Lead acid batteries generate gases, which can cause an explosion. Keep sparks and flames away from batteries. NO SMOKING. Charge batteries only in area with good ventilation. Always wear eye protection and protective clothing when working near batteries. Remove all jewelry. Do not put tools or other metal objects across the battery terminals, or the tops of batteries. Maintenance and repairs must be done by authorized personnel only. Tighten all fasteners.
MACHINE PREPARATION C1836 FIGURE 1 Your ENCORE R battery machine has been shipped complete, but do not attempt to operate without reading the following instructions: 1. Uncrate machine 2. Install scrub brushes, as outlined in the Maintenance section of this manual. 3. Install batteries as follows A. Turn the key to the “O” position B. Lift the hinged seat and cover, then engage safety arm. C. Use a battery lifting device with a 150 LB. (68KG) capacity to place the batteries in the battery compartment. D.
MACHINE CONTROLS SOLUTION CONTROL KNOB - (See Figure 1) The solution control knob is located to the left-hand side of the steering wheel. Turning the knob clockwise will increase the flow of solution and water. The farther the solution control knob is turned the heavier the flow of water and solution will be. Turning the knob counter clockwise will decrease the flow of the solution and water. To turn the water and solution off, turn the knob all the way counterclockwise.
MACHINE CONTROLS SQUEEGEE BLADE SWITCH (See Figure 4) The squeegee blade switch is located on the console to the left of the steering wheel. Pressing the squeegee switch in the forward position turns the vacuum-motor off and the squeegee blades are up. When the switch is in the middle, the vacuum motor is on and the squeegee blade is down. Pressing the squeegee switch in the downward position, will raise the blade and keep the vacuum on.
MACHINE CONTROLS 1` 2 3 C1837 FIGURE 8 SCRUB BRUSH SWITCH - (See Figure 7) The Scrub Brush Switch is located to the far left of the steering wheel on the control panel. The Scrub Brush indicator lights are located to the left of the Scrub Brush switch. With brushes up & the key switch is turned on the red indicator will automatically be on. This indicates that the scrub brushes are in the up position. Press and hold the scrub brush switch down until the yellow indicator light illuminates.
MACHINE CONTROLS PRE SWEEP OPTION Operation The sweeper is designed to turn the broom on as it is lowered. To lower the broom release hand lever on right side. To remove the hopper, grasp each end of the hopper and lift it up and out of the frame. Adjustment The main broom on this sweeper is free floating and has no adjustment for wear. If your broom pattern is wide on one side, place the broom in the down position, turn the key off and loosen the mounting bolt on the left end of the broom, then retighten.
MACHINE CONTROLS NEUTRAL FORWARD NEUTRAL REVERSE P4066 FIGURE 13 ACCELERATOR and DIRECTIONAL CONTROL PEDAL - (See Figure 11) The Accelerator and Directional Control Pedal is located on the floor of the operator’s area. This pedal controls the machine direction and travel speed. If the machine stops due to an electrical system overload in the power panel controller, place the forward/reverse pedal in neutral to reset the controller. 1. 2. 3. 4. 5. Put foot pressure on the upper portion of the pedal.
OPERATING INSTRUCTIONS SEAT ADJUSTMENT- (See Figure 12) This lever is located on front of the seat and allows the seat to be adjusted. Note Before starting, perform the pre-start checks. C1851 FIGURE 14 PRE-START CHECKLIST 1. Check controls for proper operation. 2. Make sure all controls are in the “O” position 3. Be sure accelerator/directional control pedal is in the neutral position 4. Check all flaps for damage or wear 5. Check scrub brushes 6.
OPERATING INSTRUCTIONS RECOVERY TANK SOLUTION TANK C1832 FIGURE 15 TO BEGIN THE CLEANING OPERATION 1. Lower brushes to the desired position. SCRUB DECK = NORMAL RANGE OR HEAVY 2. Place the squeegee switch in the lower position. SQUEEGEE BLADE = LOWER 3. Move solution control knob to the desired setting and begin operation. SCRUBBING THE AVERAGE FLOOR WITH LIGHT TO MEDIUM SOILAGE In this operation, cleaning is accomplished in one pass, with simultaneous solution feed, scrubbing and dirty water pick up.
OPERATING INSTRUCTIONS NOTE After stopping, perform these post operation checks. POST OPERATION CHECKLIST Check Battery Condition and recharge, if necessary. 1. 2. 3. 4. 5. Check all flaps for wear, damage and adjustment. Drain and clean recovery tank. Clean recovery tank screen and float. Check scrub brushes for wear or damage. Check rear and side squeegee for wear, damage and adjustment. TO DRAIN RECOVERY TANK A drain hose for the recovery tank is located underneath the right side of the machine.
HELPFUL HINTS FOR CLEANING P4134 FIGURE 16 - WARNING Do not turn the steering wheel sharply when the machine is in motion. The sweeper is very responsive to movement of the steering wheel. Do not make sudden turns. - Scrub in straight paths. Do not bump posts. Do not scrape the sides of the machine. - When the machine is in motion, do not push the directional/speed control pedal all the way forward. This is the same as starting in “high” and will put a strain on the motor and drive system.
SERVICE CHART C1833 FIGURE 17 EVERY 8 HOURS or DAILY operation check and clean/adjust if necessary - (Figure 15): 1. All flaps for wear or damage 2. Parking brake 3. Clean recovery tank 4. Scrub brushes for wear or damage 5. Rear squeegee for wear or damage 6. Charge and check batteries 50 HOUR MAINTENANCE CHECKLIST: 7. Check battery electrolyte level 8. Lubricate front wheel bearing and pivot 100 HOUR MAINTENANCE CHECKLIST: 9. Lubricate drive chain, use motorcycle chain lube 10. Clean solution tank 11.
SERVICE CHART WARNING Maintenance and repairs must be done by authorized personnel only. WARNING Electrical repairs must be done by authorized personnel only. Consult your American-Lincoln Authorized Service Person to do service procedures. Use only genuine American-Lincoln parts. WARNING Always park on a level surface, turn key off, and engage parking brake before working on the machine to keep it from creeping or rolling.
SERVICE INSTRUCTIONS REPLACING THE SCRUB BRUSHES (See Figure 18) Replace Scrub Brushes when the bristles become worn to ¾”. 1. Lower scrub brushes. 2. Swing open side squeegees 3. Lift scrub brushes 4. The scrub brush is held in place by a ring. Pull the brush straight down to remove it. 5. Push a new brush onto the scrub brush driver until it clicks in place. 6. Lower Scrub Deck to the NORMAL position and check the brush for proper floor contact. 7. Replace side squeegees.
SERVICE INSTRUCTIONS Note Toothed lock washers must be on top of support plate SQUEEGEE WHEEL ADJUSTMENT - (See Figure 20) Adjust if squeegee leaves water on floor. The wheels must be 3/16” (.476 cm) above the floor. 1. Set the parking brake. 2. Turn the key switch to the “I” position. 3. Put the Squeegee Blade Switch in the “LOWER” position. 4. Turn the key switch to the “O” position. This will turn off the vacuum fans. 5. Loosen the wheel brackets by turning the adjustment handles. 6.
SERVICE INSTRUCTIONS SETTING THE PARKING BRAKE (See figure 21) Set the brakes using the following steps; 1. Park the machine on a smooth level surface. 2. Press down on the brake pedal. 3. With your toes, press down on the upper part of the brake pedal. (This will set the parking brake) 4. To release press down on the brake pedal again (This will release the parking brake). C1848 FIGURE 21 Rev.
SERVICE INSTRUCTIONS STEERING ADJUSTMENT-(See Figure 24) There are two adjustments available on the steering system: sprocket adjustment and pivot play. C1859 FIGURE 24 STEERING ADJUSTMENTS - PIVOT ADJUSTMENT (See Figure 24) Adjust if front tire rocks during use. 1. Park the machine on a smooth level surface and set the parking brake. 2. Jack up the front of the machine until the front wheel clears the ground. 3. Use proper jacking equipment and install jack stands whenever working under a machine. 4.
SERVICE INSTRUCTIONS SWEEPER OPTION-DRIVE BELT ADJUSTMENTS Motor Drive Belt 1. Loosen idler pulley 2. Move in slot in main frame 3. Retighten Main Broom Belt 1. Loosen broom lift arm with bolt and nut. 2. Tension belt by inserting a flat blade screwdriver in the adjusting slot in support bracket and pry arm forward. 3. Tighten nut. Side Broom Belt 1. Loosen pulley and broom with screw and nut 2. Force pulley and broom forward 3. Retighten BATTERY REMOVAL 1.
SERVICE INSTRUCTIONS WARNING Hydrogen gas is formed during the charging operation and is explosive! Only charge batteries in a well-ventilated area with the lid open. Avoid any open flame or electrical sparks. Pulling out the charger plug, with the charger still on, will cause an arc and must be avoided. WARNING Batteries are heavy. Get help to lift the batteries. WARNING Always remove jewelry, wear protective clothing, and face protection when working near batteries.
TROUBLE SHOOTING PROBLEM PROBABLE CAUSE 1. Worn scrubbing brushes 2. Incorrect method of operation Poor Scrubbing 3. Wrong cleaning agent or mixture 4. Poor solution distribution 5. Brushes won't turn Water Splashes From Sides Of Scrub Deck 1. Scrub deck bumpers, poor contact with floor. 2. Squeegee blades worn or damaged. 3. Too much solution 1. Circuit breaker #4 is tripped Machine Does Not Move 2. Battery Unplugged. AMERICAN LINCOLN TECHNOLOGY ENCORE R Operator’s Manual REMEDY 1.
TROUBLE SHOOTING PROBLEM Poor Water Pick up at Squeegee 1-27 PROBABLE CAUSE REMEDY 1. Recovery tank full. 1. Empty tank 2. Squeegee is worn or damaged 2. Examine squeegee rubber blade for cuts or worn spots. Replace if necessary. 3. Clogged suction hose or pick 3. Disconnect suction hose up tool. from squeegee, flush squeegee & hoses throughly. 4. Losse connections between 4. Check all hose connections suction hose & squeegee for looseness or damage 5. Reset circuit breaker or 5.
TROUBLE SHOOTING PROBLEM Squeegee leaves Wet Spots Squeegee Makes Excessive Noise PROBABLE CAUSE 1. Lift actuator out of adjustment 2. Squeegee wheels out of adjustment 3. Incorrect spring pressure 1. Adjust 2. Adjust 1. Blades worn or damaged 2. Incorrect spring pressure 1. Replace 2. Adjust 1. Broom Jammed 2. Hopper full 3. Broom does not turn 4. Hopper not installed correctly 5. Poor broom pattern 6. Flaps worn 1. Remove obstruction 2. Empty 3.
ORDERING PARTS Parts may be ordered from American-Lincoln authorized distributors. Inspect the Alto U.S. serial plate to avoid delays in filling you orders: MODEL NO. SERIAL NO. Manufactured By American Lincoln Technology ® Bowling Green, Ohio 1. Use the model number, catalog number, and serial number when ordering. 2. Give the part number, description, and quantity of parts needed. 3. Give shipping instructions for either freight, UPS, or parcel post.
HARDWARE ABBREVIATIONS ABBREVIATIONS - SCREWS ADJ ADJ.SP BHM BHS CAPT.SL CAPT.WG FHM FIL.
HARDWARE LEGEND 1-31 Key No.
HARDWARE LEGEND Key No.
HARDWARE LEGEND 1-33 Key No.
HARDWARE LEGEND Key No.
HARDWARE LEGEND 1-35 Key No.
HARDWARE LEGEND Key No. Part Number Description H309 H311 H312 H313 H314 H315 H316 H317 H318 H319 H320 H321 H322 H323 H324 H325 H326 H327 H328 H329 H330 H331 H332 H333 H334 H335 H336 2-00-01081 2-00-05024 2-00-05227 2-00-04652 2-00-03836 2-00-00593 2-00-00044 2-00-00252 2-00-04750 2-00-02352 2-00-05424 2-00-04699 2-00-03993 2-00-00244 2-00-05329 2-00-00092 2-00-00235 2-00-05444 2-00-03994 2-00-00036 2-00-00397 2-00-02779 2-00-05433 2-00-00451 2-00-05450 2-00-03404 2-00-04620 Screw - T/C RH #8-32x.
CONNECTION & HARNESS ROUTING KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 0795-127-1 2-00-04345 7-13-07096 2-00-04588 2-00-04203 Harness - Mach.
AMERICAN LINCOLN TECHNOLOGY ENCORE R Operator’s Manual HORN 2 6 7 4 C1861-A/9906 1E 9 77 D G F E C B A 10 HORN BUTTON 11 12 10 12 11 9 DO NOT TIE WIRES 1D&1E TO HARNESS 1D 1E 17 19 18 TIE HARNESS TO BKT. WITH ITEM #2 A 5 77 B K J RT.BRUSH MOTOR LT.BRUSH MOTOR 5 77 A LT.BRUSH MOTOR (+) TOP TERM. 77 B K TIE HARNESS TO MOTOR ITEM #2 ROUTE HARNESS THROUGH 1 IN. HOLE TIE HARNESS TO BKT.
CONNECTION DRAWING 4 5A CONDITION METER 8 5 14 23 7L 23A 24 BACK VIEW 70 3 36 31 1A 1B 1 OPTION 26 7G TOM PUHL IS GOOD!!! ESP BRUSH DECK UP OPTION RECOVERY HIGH 77Z 77 LIGHTS BRUSH DECK DOWN 44308A SOL. FLOW MODULE ST. 1A BATTERY LOW KEY SWITCH 5A 7F 70 22 7P 37 7R D C 22 C 20 20 A 21 A M- B- C B+ A2 22A SOL 3A 3C 27 28 26 36 35 23 5 REV. 25 W 25 Z 25 25 25 Y 9 9A REV.
1-40 C1819/0001 1 A 50AMP. IF DUAL VAC MTRS. CC 2A G F CB-1 25 AMP. H 1T CB-2 45 AMP. J E K E CB-3 45 AMP. L NEW MODULE 12 4 3 11 (B+) 12 7 6 5 77B 77A CB-4 10 AMP 1 16 35 RED YEL 28 27 28 11A(+) 27 (B+) (M+) 32 American-Lincoln Technology® ENCORE R 11 16 7,7C,7D,7H 77,77C,77D 7K,7J,7H RECOVERY HIGH SW. SOLUTION LOW SW. LOW VOLTAGE OPENS IN NEUTRAL ONLY 17 9A 9 1 25V8 9A 25X 19 17 18 6 FWD. 7K C A1 FIELD S1 A2 S2 5B C 19 6A 5A ARM A2 A2 B+ REV.
TABLE OF CONTENTS - CHAPTER 2 Frame Assembly ..................................................................................................................................... 2-2 Front Wheel Drive .................................................................................................................................... 2-3 Rear Assembly ....................................................................................................................................... 2-4 Steering ...........
FRAME ASSEMBLY KEY NO. 1 2 3 4 5 6 7 8 9 10 11 PART NO. 7-27-07190 7-66-05011-1 7-70-05175 7-77-00122 7-13-07184 7-58-05287 DESCRIPTION Main Frame Weldment Roller - Bumper Pin - Roller Bumper Rubber - Front Splash Clamp - Front Splash Plate - Decal 8-79-00030 2-00-00540 7-58-05291 Ground Strap Retaining Ring Support - Drain Hose 1 8 1 Lock Washer, #10 Med. HS Nut Hex MS #10 - 24 x .375 x 1.25 Screw, ¼ - 20 x .750 HHC Nut ¼ - 20 Insert Fiber Screw, 5/16 - 18 x .
FRONT WHEEL DRIVE 5 H50 H52 H153 7 8 6 H44 H35 4 H253 H48 H53 3 H48 7 H53 H52 H48 H254 2 C1811/0003 1 9 KEY NO. PART NO. DESCRIPTION 1 2 3 4 5 0785-083 7-58-05280-1 7-58-05281 8-57-05022 7-57-05032 Drive Assembly Plate, Drive MTG. Dive Mounting Bracket Sprocket Pivot Caster 1 1 1 1 1 6 7 8 9 7-13-05065 2-95-04182 7-30-08017 7-30-05105 Steering Chain Fiber Nut Guide - Motor Wires Guard, Wheel 1 8 1 1 Screw, 5/16 - 18 x 1.000 HHM Lock Washer, 5/16 HS Med. Screw, 3/8 - 16 x 1.
REAR ASSEMBLY 1 4 H53 USE LOCTITE 609 ON BEARINGS H46 H52 H69 H47 H153 3 REMOVE SELF ADJUSTING SPRING FROM ASSY 5 C1801/0001 KEY NO. 1 2 3 4 5 PART NO. DESCRIPTION QTY. 7-70-05184 7-89-08096 0860-636 34711B 2-00-04636 Shaft - Rear Axle Wheel - Rear (Polyurethane) Brake - LH Wheel Cover Bearing 1 2 1 2 4 Nut, 5/16-18 Fiber Insert Screw, 3/8-16 x .750 HHC Flat Washer, .750 x .390 x .094 Lock Washer, Helical Spring 3/8 Med. Screw, 5/16-18 x .
STEERING 1 2 8 9 3 H26 H84 4 H20 6 H44 5 C1812/0002 7 KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-89-08083 2-00-05417 7-70-05176 7-37-00001 7-25-06031 Steering Wheel Roll Pin Shaft-Steering Wheel Universal Joint Flange-Steering Mount 1 1 1 1 2 6 7 8 9 2-00-05159 7-70-05182 7-33-02393 7-75-01196 Bearing Steering Shaft Hose Spacer, Steering Wheel 2 1 10” 1 Screw, 1/4 x 20 x 1.500 HHC Nut, 1/4-20 Insert Fiber Lock Washer, 5/16 HS Med. Screw, 5/16 - 18 x 2.
BRAKE ASSEMBLY - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY.
BRAKE ASSEMBLY - EXPLODED VIEW H20 8 5 7 6 H48 H27 11 H27 H86 12 9 H26 10 H233 13 4 3 FRAME (REF) H52 TEMPORARY REPLACE WITH HARDWARE MTG KICK PANEL (ASSY 71210) 2 15 H27 H55 C1802/0004 14 H27 1 H55 AMERICAN LINCOLN TECHNOLOGY ENCORE R H50 H26 2-7
CONSOLE ASSEMBLY - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-52-00164 7-52-00165-1 8-06-01084 7-52-00167 2-95-04182 Panel - Kick (Welded) Panel - Dash Bearing Panel - Steering Nut - 3/8 - 16 Elastic Stop Nut 1 1 1 1 6 6 7 8 9 7-33-05121 8-82-00030 8-32-09008 7-90-07424 Console Switch - Push Button Lid Horn Wire - IE 1 1 1 1 Flat Washer, .500 x .219 x .063 Screw, 1/4-20 x .625 HHC Nut, 1/4-20 Fiber Insert Washer, .625 x .281 x .
CONSOLE ASSEMBLY - EXPLODED VIEW H26 H27 2 3 H86 H27 H24 H131 4 H9 H136 6 1 H72 H185 C1817/0108 7 8 AMERICAN LINCOLN TECHNOLOGY ENCORE R 5 2-9
SCRUB DECK ACTUATOR - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY.
SCRUB DECK ACTUATOR - EXPLODED VIEW AMERICAN LINCOLN TECHNOLOGY ENCORE R 2-11
SCRUB DECK ASSEMBLY (34”) - PARTS LIST KEY NO. PART NO. DESCRIPTION 1 2 3 4 5 7-27-07191-1 7-08-00913 7-08-00914 7-03-04176 2-00-04602 Scrub Deck (34”) Bracket - Brush Arm Bracket Brush Load Link - Brush Frame Clamp 1 4 1 4 2 6 7 8 9 10 7-33-09034 7-20-00006 7-23-03056 0785-088 0782-144 Hub Brush Driver Brush Driver-Male with Hub Nut Reducer Assy (Ratio 18.5 to 1) Brush Motor 2 2 8 2 2 11 12 2-00-03169 2-00-00706 Spacer ¼ sq x 1 ¼ Key 4 2 Screw, #10-24 x .
SCRUB DECK ASSEMBLY (34”) - EXPLODED VIEW H46 3 4 MTG BRACKETS TO TOP SIDE OF FRAME FLANGE H244 H62 H69 H245 2 8 H151 9 10 H305 H7 H44 5 H64 1 H12 H53 H48 H69 11 12 7 6 R. H. BRUSH H273 L.H.
SCRUB DECK ASSEMBLY (38”) - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-27-07192-1 7-08-00913 7-08-00914 7-03-04176 2-00-04602 Scrub Deck (38”) Bracket - Brush Arm Bracket Brush Load Link - Brush Frame Clamp 1 4 1 4 1 6 7 8 9 10 7-33-09034 7-20-00006 7-23-03056 8-13-07091 2-00-03169 Hub Brush Driver Brush Driver-Male with Hub Nut Clamp Spacer 2 2 8 1 4 11 12 13 0785-088 0782-144 2-00-00706 Reducer Assy (Ratio 18.5 to 1) Brush Motor ¼ sq x 1 ¼ Key 2 2 2 Screw, #10-24 x .
SCRUB DECK ASSEMBLY (38”) - EXPLODED VIEW H46 3 H244 H62 H69 H245 2 4 9 12 11 H151 H7 8 5 H305 H64 H44 H46 H53 1 H48 10 C1893/9906 H69 13 6 R.H. BRUSH 7 H273 L.H.
BRUSHES AND PAD DRIVERS(34”) PAD ASSEMBLY 17” (17520C) PART NO. 53135B 833802 838301 962495 56949A 962737 DESCRIPTION Pad Driver, Molded Face 17” OD Gimbal, Brush Spring, Brush Holder Screw, ¼ - 20 x 1 Center - Lok 3 Screw, #8 x 5/8 pan HD. Phillips, Sheet Metal QTY. 1 1 1 6 1 3 BRUSH ASSEMBLY GRIT 17” (11425B) PART NO. 51462B 833802 838301 962495 DESCRIPTION Brush, Grit 17” OD Gimbal, Brush Spring, Brush Holder Screw, ¼ - 20 x 1 QTY. 1 1 1 6 BRUSH ASSEMBLY POLY 17” (11424B) PART NO.
BRUSHES AND PAD DRIVERS(38”) PAD ASSEMBLY 19” (17524B) PART NO. DESCRIPTION QTY. 53143B 833802 838301 962495 56949A 962737 Pad Driver, Molded Face 19” OD Gimbal, Brush Spring, Brush Holder Screw, ¼ - 20 x 1 Center - Lok 3 Screw, #8 x 5/8 pan HD. Phillips, Sheet Metal 1 1 1 6 1 3 BRUSH ASSEMBLY 19” (11433B) PART NO. DESCRIPTION QTY. 51477B 833802 838301 962495 Brush, Grit 19” OD Gimbal, Brush Spring, Brush Holder Screw, ¼ - 20 x 1 1 1 1 6 BRUSH ASSEMBLY 19” (11433B) PART NO. DESCRIPTION QTY.
SQUEEGEE LIFT ASSEMBLY - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY.
SQUEEGEE LIFT ACTUATOR - EXPLODED VIEW H26 H25 H20 H39 10 11 12 4 9 H27 H26 H200 7 13 8 3 H146 H27 6 H26 H135 1 5 H237 H36 H35 H45 C1803/9909 H26 2 AMERICAN LINCOLN TECHNOLOGY ENCORE R 2-19
SIDE SQUEEGEE (34”) - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY.
SIDE SQUEEGEE (34”) - EXPLODED VIEW 4 2 9 H46 1 H63 H44 H34 H34 H25 3 5 6 7 LEFT SIDE H27 H17 4 2 RIGHT SIDE H43 H44 9 H34 H51 1 8 3 H25 H52 H236 C1805/9807 H46 H34 H53 H54 H27 H17 5 7 6 AMERICAN LINCOLN TECHNOLOGY ENCORE R 2-21
SIDE SQUEEGEE (38”) - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY.
SIDE SQUEEGEE (38”) - EXPLODED VIEW 4 H43 2 RIGHT SIDE H44 9 H34 H51 1 H34 H52 8 3 H236 H25 H53 H54 H46 H27 5 H17 6 7 5 3 4 1 H43 LEFT SIDE H44 H51 H25 H34 H52 H46 9 2 6 H34 H53 H236 7 8 H54 H27 C1868/9807 AMERICAN LINCOLN TECHNOLOGY ENCORE R H17 2-23
REAR SQUEEGEE (34” & 38”) - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY.
REAR SQUEEGEE (34” & 38”) - EXPLODED VIEW 8 4 H120 9 3 H20 1 7 5 2 6 AMERICAN LINCOLN TECHNOLOGY ENCORE R 2-25
SEAT ASSEMBLY - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-52-00168 7-16-07406 7-72-05005 7-69-00004 8-51-05016 Panel-Seat Pedestal(Weldment) Seat Deck (Weldment) Seat Adjuster Kit Seat Pan-Battery 1 1 1 1 1 6 7 8 9 10 7-66-00186 0875-101 7-16-07405 7-16-07404 8-06-05004 Rod-Seat Panel Power Cable Cover - Side Cover - Side Terminal Block 1 1 1 1 2 11 12 13 14 8-21-04016 8-21-04050 7-39-00006 8-75-01205 Edging Edging Knob Spacer, Blower Mounting 1 1 1 2 Screw, #10 - 24 x .
SEAT ASSEMBLY - EXPLODED VIEW 4 3 2 12 H43 H185 8 H46 7 1 H27 H46 5 6 H35 13 H43 11 H46 H11 10 SEE DETAIL A H159 H7 H27 H25 9 H26 14 H20 C1816/0003 ATTACH HARNESS WIRES HERE ATTACH POWER CABLE HERE DETAIL A SCALE .
VACUUM ASSEMBLY - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-48-00033-1 7-33-02373 0782-124 8-88-00016 2-00-02220 Vac Manifold Flexible Hose Vac Fan Dust Unloader Valve Hose Clamp 1 1 1 1 1 6 7 8 9 10 7-10-04008 Float Cage 1 7-26-04012 Float Ball 1 11 12 13 14 15 2-95-04182 Nut 2 7-75-01184 2-22-00003 Spacer Vac Fan Gasket 3 1 16 17 18 19 2-00-02216 2-00-04431 7-58-05285-1 7-30-05103-1 Hose Clamp Cover Plate-Vac Inlet Guard-Vac Motor 3 1 1 1 Screw, 1/4-20 x 2.
VACUUM ASSEMBLY - EXPLODED VIEW AMERICAN LINCOLN TECHNOLOGY ENCORE R 2-29
FORWARD/REVERSE PEDAL - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY.
FORWARD/REVERSE PEDAL - EXPLODED VIEW 2 4 10 9 3 H15 1 H45 H159 H121 H307 H189 H48 H27 H26 6 H45 H45 H44 12 H89 C1818/9906 11 H277 13 AMERICAN LINCOLN TECHNOLOGY ENCORE R 7 5 8 2-31
RECOVERY TANK H126 H328 2 10 9 7 5 6 H197 1 H53 8 H278 3 C1810/0002 4 KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-83-04173 7-16-07399 2-00-02217 7-33-02378 7-09-01122 Recovery Tank Cover - Tank Access Hose Clamp Hose - Drain Bushing 1 1 1 1 1 6 7 8 9 10 7-09-01124 0775-164 7-25-02095 7-13-05064 7-25-02098 Bulk Head Fitting Float Switch (Rev Gray) Drain Plug Assy. Chain Plug - Pull 1 1 1 1 1 Screw, 3/8 - 16 x .750 HHC Lock Washer, Helical Spring 3/8 Med. Screw, #10 - 16 x .500 Washer, 1.
SOLUTION TANK 2 9 6 H126 H328 5 4 1 8 3 H197 H53 BACK AND RIGHT FRONT MTG HOLES 7 H47 LEFT FRONT MTG HOLE H278 10 C-1813/0002 KEY NO. PART NO. DESCRIPTION 1 2 3 4 5 7-83-04174 7-16-07399 7-09-01124 7-09-01122 7-87-02191 Solution Tank Cover-Tank Access Bulk Head Fitting Bushing Tube-Float Switch 1 1 1 1 1 6 7 8 9 10 0775-217 7-24-04053 7-25-02095 2-00-05064 7-33-02374 Float Switch Filter-Solution Drain Plug Assembly Chain Hose-Solution 1 1 1 1 Ref. Screw, 3/8-16 x .
SOLUTION CONTROL - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 8-13-07003 7-88-00073 7-25-02053 7-25-02037 2-00-05406 Clamp Valve-Solution Fitting-Straight Fitting-Tee Fitting-Elbow 1 1 1 1 2 6 7 8 9 10 2-00-02220 2-95-04388 7-33-02374 7-33-02376 7-33-02379-1 Hose Clamp Hose Clamp Hose-Solution Feed Hose-Solution Feed (RH) Hose-Solution Feed (LH) 6 2 2 1 1 11 12 13 7-33-02394 2-00-05380 8-21-04016 Hose Elbow Bumper 3” 1 1 Nut, 1/4-20 Fiber Insert Washer, .625 x .281 x .
SOLUTION CONTROL - EXPLODED VIEW 11 12 8 OVER SQUEEGEE LIFT BRACKET TO SOLUTION TANK H27 H26 2 C1822/9906 9 1 4 5 8 13 7 3 6 10 H26 AMERICAN LINCOLN TECHNOLOGY ENCORE R 2-35
INSTRUMENT POWER PANEL - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-52-00165-1 8-82-00041 0775-231 8-74-00014 2-00-04825 Panel-Dash Key-Switch Controller Solenoid-Power Panel Solenoid Ref.
INSTRUMENT POWER PANEL - EXPLODED VIEW 13 14 15 12 1 11 10 H124 2 H26 H159 3 H10 SEE DETAIL A H15 H6 H222 H24 H187 4 H188 H11 H24 H27 H26 5 H6 H12 6 H26 H27 7 H12 H25 H27 H7 18 17 16 9 8 H12 C1830/9906 5 H62 H26 H27 DETAIL VIEW A AMERICAN LINCOLN TECHNOLOGY ENCORE R 2-37
INSTRUMENT POWER PANEL (cont.) - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY.
INSTRUMENT POWER PANEL (cont.
DECALS - PARTS LIST KEY NO. PART NO. DESCRIPTION QTY.
DECALS - EXPLODED VIEW 4 A A 14 17 16 23.50 2.00 5.00 VIEW A-A (FRONT OF SEAT) 3.00 3.00 WARNING VIEW B-B WARNING Electrical hazard. Shocks could cause severe personal injury and property damage. Disconnect battery before removing this power panel cover. To avoid personal injury or property damage, read the operator's manual before using this machine. Maintenance and repairs must be performed by authorized personnel only. 1 3 .38 4.00 MODEL NO. SERIAL NO.
TABLE OF CONTENTS – CHAPTER 3 OPTIONS Back-Up Alarm ....................................................................................................................................... 3-2 Light Package ......................................................................................................................................... 3-3 Overhead Guard .....................................................................................................................................
BACK-UP ALARM H121 H9 H165 7 H27 1 H89 EXISTING DECK MTG HARDWARE TIE ALL WIRES TO HARNESS USING ITEM #9 EXISTING WIRE BACK UP ALARM SW 1B 2 EXISTING ( -) POST 2 5 BLK 3 6 8 RED BACK UP ALARM 4 C1823 KEY NO. 5 OPTION 0780-422 PART NO. DESCRIPTION QTY.
LIGHT PACKAGE H126 10 TO (-) ON CONDITION METER WITH WIRE 7L 6 13 12 1 5 7 6 CONNECT EXISTING WIRE 5A 12 TO (-) ON 11 POWER PANEL C1827/9810 H231 GREEN 3 BLACK 2 4 9 H12 8 OPTION 0780-428 KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 8-40-05052 8-40-05053 2-00-04210 8-75-01207 8-82-00027 Head Light Tail Light Clamp Spacer-Tail Light MTG Light Switch 1 1 1 2 1 6 7 8 9 10 2-00-03418 2-00-04479 2-00-04578 2-00-04626 2-00-01862 Term- .25 FISO Term- 3 Way Term- .
OVERHEAD GUARD OPTION 0780-432 KEY NO. 1 2 3 4 PART NO. DESCRIPTION QTY. 7-30-05086 7-30-05100 7-30-05101 7-30-04182 Top-Overhead Guard Leg-Overhead Guard RH Leg-Overhead Guard LH Fibre Nut 1 1 1 8 Screw, 3/8-16 x 1.000 HHC Flat Washer, .750 x .390 x .094 Screw, 1/2-13 x 1.250 HHC Nut, 1/2-13 Fibre Lock Flat Washer, 1.000 x .516 x .
STROBE LIGHT WITH OVERHEAD GUARD - PARTS LIST OPTION 0780-423 or 0780-459 KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 8-58-05228 3-61-02014 2-00-04345 3-61-00193 3-61-00189 Plate-Flasher Mounting Convoluted Tube 40” Ty-Rap Wire - 16 GA (RED) Wire - 16 GA (BLACK) 1 4 10ft. 10ft. 6 6 7 8 9 10 8-40-05020 8-40-05036 2-00-04626 2-00-04578 2-00-00828 2-00-04479 Red Strobe Light (12-48) Amber Strobe Light (12-48) Terminal Terminal Terminal Terminal 1 1 2 2 1 1 Nut, Hex MS #10-24 x .375 x .
STROBE LIGHT WITH OVERHEAD GUARD - EXPLODED VIEW 3-6 AMERICAN LINCOLN TECHNOLOGY ENCORE R
STROBE LIGHT WITHOUT OVERHEAD GUARD - PARTS LIST OPTION 0780-424or 0780-460 KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-81-00203 3-61-02014 2-00-03261 3-61-00193 3-61-00189 Support-Warning Light Convoluted Tube Grommet Wire - 16 GA (RED) Wire - 16 GA (BLACK) 1 10ft. 10ft. 6 6 7 8 9 10 11 8-40-05020 8-40-05036 2-00-00491 2-00-04578 2-00-00828 2-00-04626 2-00-04479 Red Strobe Light (12-48) Amber Strobe Light (12-48) Grommet Terminal Terminal Terminal Terminal 1 1 1 2 1 2 1 Nut, Hex MS #10-24 x .
STROBE LIGHT WITHOUT OVERHEAD GUARD - EXPLODED VIEW 3-8 AMERICAN LINCOLN TECHNOLOGY ENCORE R
DUAL VACUUM SYSTEM OPTION 0780-427 KEY NO. 1 2 3 4 5 6 PART NO. DESCRIPTION QTY. 0782-124 7-75-01184 2-22-00003 7-64-00032 2-00-05065 2-00-01862 Vac Fan Spacer Vacuum Fan Gasket Circuit Breaker - 50A Terminal - Wire Nut (Blue) Terminal - #10 Ring 1 3 1 1 2 2 Lock Washer, #10 Med. HS Screw, RHM 25-20 x 4.
ARM REST OPTION 3 5 1 6 C1883/9809 7 2 8 4 OPTION 0780-470 KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 * * * * * Left Arm Bracket Right Arm Bracket Molded Arm Bracket 3/8 - 16 x 1.50 LG BHSCS 3/8 - 16 x .50 LG FHSCS 1 1 2 2 2 6 7 8 * * * 3/8 - 16 Center Lock Acorn Nut 5/16 - 18 x .
MAIN BROOM SWEEPER OPTION - PARTS LIST OPTION 0780-468 (3 OF 7 and 7 of 7) KEY NO. PART NO. DESCRIPTION QTY.
MAIN BROOM SWEEPER OPTION - EXPLODED VIEW 8 H53 H52 10 9 14 H62 H34 H48 12 2 15 11 14 5 4 H62 3 1 H53 H54 H280 H47 H49 H34 H53 H44 H43 13 6 7 17 C1873/9906 16 3-12 AMERICAN LINCOLN TECHNOLOGY ENCORE R
BROOM DRIVE SWEEPER OPTION - PARTS LIST OPTION 0780-468 2 OF 7 KEY NO. PART NO. DESCRIPTION QTY.
BROOM DRIVE SWEEPER OPTION - EXPLODED VIEW 20 1 H142 H74 H72 H15 2 19 H146 5 H144 3 18 H279 4 H63 H171 H44 23 21 15 H33 14 17 H63 H64 H64 16 H62 H62 4 H24 H72 14 6 H25 7 8 H72 9 7 H62 10 H185 11 H72 C1872/9903 H15 4 22 12 13 H72 H63 H25 H148 3-14 AMERICAN LINCOLN TECHNOLOGY ENCORE R
FIRE EXTINGUISHER OPTION 0780-462 KEY NO. 1 2 PART NO. DESCRIPTION 2-95-01998 8-83-04033 Screw #14-10 x .75 T/F RH Fire Extinguisher QTY.
SEAT SWITCH KIT NOTE: TIE AROUND SWITCH UNDER TERMINALS FRONT OF MACHINE 7 2 DETAIL A (BOTTOM VIEW) SEE DETAIL A NOTE: 1. SLIDE SEAT ALL THE WAY TO THE REAR 2. PULL ITEM #3 TIGHT THRU GROMMET 8 HARNESS 0795-132 USE EXISTING HARDWARE TO FASTEN CLAMP. TAP LIGHTLY WITH HAMMER TO COMPRESS CLAMP.
FRAME AND FLAPS OPTION - PARTS LIST OPTION 0780-468 1 OF 6 KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-27-07193 7-25-08080 7-13-07126 7-25-08081 7-13-07194 Broom Housing Flap, Rear Clamp, Flap (Rear) Flap, Side Clamp, Side Sq. 1 1 1 2 2 6 7 8 9 9 7-29-00253 7-29-00252 2-00-04341 7-29-00251 7-29-00254 Gasket, Hopper Gasket, Hopper Grommet Gasket, Plastic Hopper Gasket, Steel Hopper 1 1 1 1 1 Screw, #10-24 x .500 RHM Nut, Hex #10-24 Fiber Insert Screw, ¼ - 20 x .
FRAME AND FLAPS OPTION - EXPLODED VIEW 8 1 5 4 H6 H26 H15 3 H12 2 H26 H86 9 6 7 C1871/0004 3-18 AMERICAN LINCOLN TECHNOLOGY ENCORE R
ESP RECOVERY OPTION - PARTS LIST OPTION 0780-426 KEY NO. PART NO. DESCRIPTION QTY.
ESP RECOVERY OPTION - EXPLODED VIEW 5 13 12 9 10 11 8 14 16 6 7 6 2 5 C1869/9907 H8 15 1 3 H9 H12 2 3-20 4 AMERICAN LINCOLN TECHNOLOGY ENCORE R
HOPPER SWEEPER OPTION (PLASTIC) 4 3 5 1 H167 H126 H250 2 C1875/9903 OPTION 0780-468 5 OF 7 KEY NO. 1 2 3 4 5 PART NO. DESCRIPTION QTY. 7-32-06022 7-55-08160 7-25-08079 7-13-07193 7-08-00950 Hopper (Plastic) Pin, Hopper Guide Flap, Hopper Clamp, Hopper Flap Bracket, Stiffner 1 2 1 1 1 Screw, #10 - 24 x .500 Screw, #10 - 24 x .625 T/C Hex HD. Screw, T/FRH #14 - 10 x 1.
HOPPER SWEEPER OPTION (STEEL) 4 3 5 1 H167 2 H126 H250 C1875/9903 OPTION 0780-468 5A OF 7 KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-32-06023 7-25-08079 7-13-07193 7-30-08020 8-31-06078 Hopper (Steel) Flap, Hopper Clamp, Hopper Flap Guide, Hopper Handle 1 1 1 2 2 6 8-79-00098 Bracket 2 Nut, ¼ - 20 Insert Fiber Screw, #10 - 24 x .500 Screw, #10 - 24 x .500 T/C HH Screw, .25 - 20 x 2.
DUST CONTROL SWEEPER OPTION - PARTS LIST OPTION 0780-468 4OF 7 KEY NO. PART NO. DESCRIPTION QTY. 1 2 3 4 5 7-08-00924 0782-124 7-75-01128 7-16-07408 7-64-00025 Bracket, Vac Mounting Vac Fan Spacer Cover, C.B. Mounting Circuit Breaker, 25 Amp 1 1 1 1 2 6 7 8 9 10 8-06-05004 7-24-04052 8-11-00051 2-00-04825 0795-159 Terminal Block Filter Bag Cap, Clear Boot Solenoid Diode 1 1 2 1 1 11 8-82-00058 Switch 1 Screw, # 10-24 x .750 RHM Nut, Hex Fiber Insert #10-24 Screw, 1/4-20 x .
DUST CONTROL SWEEPER OPTION - EXPLODED VIEW 7 H250 3 2 H26 6 H7 H26 H229 H25 H27 H26 H26 H27 1 (NOTE: BAND THIS END 10 9 H12 8 4 H14 H13 H121 5 H230 3.
SPRAY WAND OPTION - PARTS LIST OPTION 0780-466 KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 34 36 37 PART NO.
SPRAY WAND OPTION - EXPLODED VIEW H224 H11 6 11 H103 7 8 1 3 4 9 9 10 13 12 14 2 11 5 16 19 REF SOLUTION TANK 29 26 22 21 20 REF INSTRUMENT PANEL 21 H8 H15 28 TO SOLUTION VALVE H132 23 25 10 REF MAIN FRAME 19 18 H281 H132 H25 24 H189 27 REF 0261-029 HOSE ASSY 27 17 19 H12 15 32 30 32 31 17 18 15 36 EXISTING #8 WIRE AS CB-6 BACK VIEW OF SWITCH 36 37 RED ( + ) 33 C1870/0004 34 BLACK ( - ) ( - ) ISOLATION POST ON POWER PANEL 35 36 3-26 34 33 AMERICAN LINCOLN T
SQUEEGEE WAND OPTION 3 1 2 C1882/9809 4 KEY NO. 1 2 3 4 PART NO. DESCRIPTION 0261-025 0261-024 7-33-02213 7-03-00044 Wand Assembly Tool Assembly Hose - Vac Adapter - Transition QTY.
BATTERY OPTION 228 A. H. 1 3 2 (+) 4 (-) C1886/9809 KEY NO. 1 1 2 3 4 FRONT OF MACHINE PART NO. DESCRIPTION QTY.
BATTERY OPTION 330 A. H. 1 (-) (+) 3 4 2 4 NARROW SIDE UP KEY NO. 1 1 2 3 4 C1885/9809 FRONT OF MACHINE PART NO. DESCRIPTION 0875-103 0875-104 0875-102 7-90-07286 8-75-01206 Battery 6v Lead Acid (Wet)(0780-205) Battery 6v Lead Acid (Wet)(0780-206) Connector Assembly (To Battery) Battery Connector Wire Spacer - Battery Pan (6) Volt QTY.
BATTERY OPTION 370 A. H. 1 (+) (-) 3 4 2 4 NARROW SIDE UP KEY NO. 1 1 2 3 4 C1884/9809 FRONT OF MACHINE PART NO. DESCRIPTION QTY.
CONNCECTION DRAWING SWEEPER OPTION - PARTS LIST OPTION 0780-468 6 OF 7 KEY NO. 1 2 3 4 5 PART NO. DESCRIPTION QTY. 2-00-04626 2-00-04578 2-00-04281 2-00-04859 Terminal, .156 Female Bullet Terminal, .156 Male Bullet Terminal, #10 Ring Terminal, .25 Ring 2 2 3 5 6 7 8 9 10 2-00-04714 2-00-04284 Terminla, #6SS Terminal, .31 Ring 4 3 2-00-02010 2-00-05411 Terminal, .
CONNCECTION DRAWING SWEEPER OPTION - EXPLODED VIEW 5 4 48in. LENGTH 11 2 12 10 60in. LENGTH TO KEY SW IGN. TERMINAL 48in. LENGTH TO (+) TERMINAL ON POWER PANEL NO C 3 13 12 2 10in. LENGTH 12 3 45in. LENGTH 11 10in. LENGTH 10in. LENGTH A1 A2 NOTE: INSERT PINS INTO GREY SB-50 CONNECTOR AFTER ROUTING THROUGH GROMMET BROOM MOTOR 45in. LENGTH 6 10in. LENGTH CB-9 11 28in. LENGTH 10in. LENGTH CB-8 25 12 25 6 7 SOL 9A 4 6in. LENGTH USE LENGTH AS IS 20in.
SPARE PARTS KITS 34” & 38” & CE KIT OPTION 0760-531 34” PART NO. DESCRIPTION 7-77-00120 7-77-00121 7-77-00118 7-77-00119 7-77-00123 7-77-00117 7-33-02377 59971A 7-33-02378 Side Squeegee LH, Outer Side Squeegee RH, Outer Side Squeegee RH, Inner Side Squeegee LH, Inner Rear Squeegee, Inner Rear Squeegee, Outer Squeegee Hose Wheel, Squeegee Adjustment Drain Hose QTY. 1 1 1 1 1 1 1 2 1 OPTION 0760-532 38” PART NO.
INDEX A Accelerator & Directional Control Pedal .................................................................................................. 1-13 Arm Rest Option ..................................................................................................................................... 3-10 B Back-Up Alarm ....................................................................................................................................... 3-2 Battery Charging Instructions....................
INDEX K Key Switch .............................................................................................................................................. 1-10 L Light Package ......................................................................................................................................... 3-3 Light Switch (Option) .............................................................................................................................. 1-9 Low Solution Light ...............
INDEX Squeegee Blade Switch .......................................................................................................................... 1-10 Squeegee Lift Assembly ......................................................................................................................... 2-18 Squeegee Wand Option ......................................................................................................................... 3-25 Squeegee Wheel Adjustment ................................
WARRANTY AMERICAN-LINCOLN TECHNOLOGY RIDER SWEEPER / SCRUBBER "BUMPER-TO-BUMPER" LIMITED WARRANTY I. COVERAGE A.
