Operator`s manual

Page -10- CLARKE TECHNOLOGY Operator's Manual -Vision 17E 230V
Machine Control Handle. See Figure 8
The machine control handle (a) is located on the back
side of the machine. The handle is adjustable for
operator comfort and ease. The handle adjustment
knobs are located at the base (b) of the handle.
Machine Lift Handle. See Figure 9.
The machine lift handle is located on the front of the
machine. Use this handle to lift the machine when
changing the brush. See the section in this Owner's
Manual "Installing or Removing a Brush or Pad Driver".
Machine Support Leg. See Figure 10.
The machine support leg is located in the front of the
machine under the bumper skirt. Put the machine
support leg down when installing or removing a brush or
pad driver.
Parking Brake
The parking brake is standard on Model 00370E only.
It is optional on all other models.
The brake prevents the movement of the machine. The
brake pedal is at the back of the machine in the lower
left hand corner. To activate the brake, push the pedal
down. To release the brake lift the pedal up.
How to Install the Squeegee
To install the squeegee, follow this procedure:
1. Attach the squeegee cable to the squeegee lift
arm (a) and squeegee bracket (b). See Figure
#11.
2. Raise the squeegee lift arm.
3. Place the squeegee onto the squeegee bracket.
4. Push the hair pin through the holes on the
squeegee bracket.
5. Attach the squeegee hose to the hose connec-
tion on top of squeegee. See figure #12.
Figure #8
Figure #9
Figure #10
Figure #11a Figure #11b
Figure #12
MACHINE CONTROLS and FEATURES (cont'd)