Operator`s manual

CLARKE TECHNOLOGY reserves the right to make changes or improvements to its machine
without notice.
Always use genuine Clarke Parts for repair.
CLARKE TECHNOLOGY U.S. LIMITED WARRANTY
This Clarke Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under normal
use and service for a period of one year from the date of purchase, when operated and maintained in accordance with Clarke's
Maintenance and Operations instructions.
This brush drive and traverse motors are warranted to be free from defects in materials and workmanship under normal
use and service for one year form the date of purchase, provided the motors are inspected for carbon motor brush wear
at six-month intervals by an authorized Clarke repair station. Failure to comply with the six-month inspection requirement or
failure to replace worn motor brushes identified during the inspection will void the one-year warranty on the motors. Cost
of the six-month inspection and replacement of carbon motor brushes is the responsibility of the purchaser. In the event of
a warranty claim on the motors, proof of inspection and any required motor brush replacement must be provided.
This warranty is extended only to the original purchaser for use of the product. It does not cover normal wear parts such
as electrical cable, rubber parts, and motor brushes.
Clarke's liability under this warranty is limited to repair of the product and/or replacement of parts and is given to
purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN. THERE ARE NO WARRANTIES WHICH
EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO WARRANTIES, INCLUDING BUT NOT LIMITED TO WAR-
RANTY OF MERCHANTABILITY, SHALL BE IMPLIED. A warranty registration card is provided with your Clarke product.
Return the card to assist Clarke in providing the performance you expect from your new floor machine.
If a difficulty develops with the product, you should: a) Contact the nearest authorized Clarke repair location or contact
the Clarke Service Operations Department, 2100 Highway 265, Springdale, Arkansas 72764, for the nearest authorized
Clarke repair location. Only these locations are authorized to make repairs to the product under this warranty. (b) Return the
product to the nearest Clarke repair location. Transportation charges to and from the repair location must be prepaid by the
purchaser. Clarke will repair the product and/or replace any defective parts with out charge within a reasonable time after
reciept of the product.
ALTO U.S. Inc., 2100 Highway 265, Springdale, Arkansas 72764.
CLARKE TECHNOLOGY: POLYDUR
®
AUTOMATIC SCRUBBER
SOLUTION AND RECOVERY TANK
FIVE-YEAR GUARANTEE
Your new Clarke Vision Automatic Scrubber has polydur Solution and Recovery Tanks. Polydur is a rotationally molded,
medium-density linear polyethylene that won't crack or dent, and withstands most corrosives and temperature extremes.
Clarke backs up your Polydur tanks with a five-year guarantee. If a tank breaks or leaks under normal use within five
years of the date of purchase, it will be replaced free.
CLARKE TECHNOLOGY UNIBODY FRAME
THREE-YEAR WARRANTY
Clarke warranties the frame for the new Vision automatic Scrubbers for a period of three years against defects in
materials and workmanship under normal use and service.
CLARKE TECHNOLOGY
2100 Highway 265
Springdale, Arkansas, 72764