Operator`s manual

Page -12- CLARKE TECHNOLOGY Operator's Manual -Vision 17E 115V
HOW TO PREPARE THE MACHINE FOR OPERATION (cont'd)
6. To install the brush or pad driver, align the lugs
on the locking plate of the pad driver or brush
with the adapter plate.
7. Turn the brush or pad driver clockwise to lock it
into position.
8. To remove a brush or pad driver, turn the pad
driver or brush to the left and remove.
9. Lift up the machine with the lift handle and
return the support leg to its normal position.
CAUTION: Leaving the brush motor
switch in its "DOWN" position
when the machine is not in
use can damage the brush or
pad driver. Always leave the
brush motor in the "UP"
position while not in use.