Operator`s manual

Clarke Technology Operator's Manual - Vision 21i - Vision V 15
HOW TO OPERATE THE MACHINE
How To Operate the Squeegee
The squeegee wipes the floor while the vacuum motor
removes the dirty solution from the floor. Use your right
hand to lower or raise the squeegee handle. To operate the
squeegee, follow this procedure:
1. To lower the squeegee and start the vac motor move
the squeegee lever to the right and down. See figure
#14a.
2. To raise the squeegee, lift the squeegee lever up.
See figure #14b.
Note: The center position lets the vac motor continue to
run with the squeegee off the floor to avoid drips.
How to Fill The Solution Tank
CAUTION: Make sure water or solution
does not enter the opening for
the vacuum motor. See figure
#15.
The solution tank lid is at the front. To fill the solution tank
follow this procedure:
1. Remove the solution tank lid.
2. Fill the solution tank with water.
3. Add a cleaning chemical to the water. for the
correct amount, follow the directions shown on the
container.
4. Replace the solution tank lid.
Figure #14a
Figure#14b
Figure #15