Operator`s manual

Clarke Technology Operator's Manual - Vision 21i - Vision V 19
Check the battery connections.
NOTE: If the problem continues consult
an authorized service person.
PROBLEM CAUSE ACTION
The cleaning is not even.
The scrub brushes or pads are worn.
There is damage to the brush assembly,
casters or the solution valve.
The brush motors are not running
The solution level is low.
The machine does not run.
The machine loses power.
Reset the circuit breaker.
Check wire connection to traverse motor.
NOTES
Replace the scrub brushes or pads.
Have an authorized service person make
the needed repairs.
Check for tripped breaker, reset. Check
for loose connections.
Fill the solution tank.
NOTE: If the problem continues consult
an authorized service person.