Operator`s manual

Page -24- Clarke Technology Operator's Manual -Vision 21i - Vision V
MAINTENANCE
Figure #28
Figure #29
Figure #30
Adjusting Squeegee Blades:
When properly installed the front blade should be ap-
proximately .06 above the rear blade. See figure #28.
Adjusting Squeegee Support Wheels:
The support wheels should be set at .12 above the floor
with the rear blade touching the floor. See figure #28.
WARNING: Maintenance and repairs must be
done by authorized personnel
only .
WARNING: Electrical repairs must be done by
authorized personnel only.
Consult your Clarke Technology Authorized Service
Person to do the service procedures.
Use only genuine Clarke Technology parts.
How to Clean the Solution Line
If the solution line becomes clogged, pull the filter
assembly out from the lower rear of the frame (Figure
#29) and remove the filter screen (Figure # 30) and clean
or replace it. Push filter assembly back inside frame.
REAR BLADE
.06
.12