Operator`s manual

Clarke Technology Operator's Manual - Vision 21i - Vision V 33
Ref # Part No. Description Qty
37 66530A Head Pressure Pin 1 x x
38 69100B Head Pressure Tube 1 x x
39 49720A Harness, Wiring 1 x x
40 61658A Gimbal Collar 2 x x
41 50204A Actuator 1 x x
42 53400A Head Pressure Spring
(ref. to pages 36 and 37) 1 x x
43 69006A Spring Seat 1 x x
44 63342A Main Frame 1 x x
45 39007B Battery Tray 1 x x
46 871334 Battery, 12 Volt, 195 AH 2 x x
881317 Battery, 6 Volt, 250 AH 4 x x
47 842406 Series Cable-9" 1 x x
41206A Series Cable-16" 2 x x
48 41211A Battery Cable 1 x x
49 838301 Brush Holder Spring 2 x x
50 77091A Label, Warning-Moving 3 x x
51 77210A Label, Wiring 1 x x
52 77209A Label, Battery Connect. 1 x x
53 77092A Label, Warning-Battery 2 x x
54 77093A Label, Warning-Falling 2 x x
55 56941A
Center Lok Asm. (Pad Driver only) 2xx
56 962737 Screw #10-16x
7
/8 (pad driver only) 6xx
57 80011A Screw
3
/8-16 x 3 CR 2 x x
58 81301A Nut,
3
/8 -16 JAM 4 x x
59 67887A Spacer, 12V Bat. 2 x x
60 925006 Cotter Pin 1 x x
61 962989 Screw, ¼-20 x 1½ 2 x x
62 962850 Screw, ½-13 x 1½ Hx 4 x x
63 59856A Washer, Rubber 2 x x
64 60509A Activator 1 x x
65 81105A Nut,
3
/8-16 ESNA 4 x x
66 85727A Screw
3
/8-16 x 1 4 x x
67 980673* Washer 8 x x
68 85735A Screw, Special Hd 2 x x
69 81216A Nut, Spacer 2 x x
70 170892 Washer, Lock ¼ 8 x x
71 70065A Label 26v 1 - x
70066A Label, 21i 1 x -
Ref # Part No. Description Qty
1 962980 Screw, 6-32 x 1 PN 4 x x
2 47374A Lever Switch
(Scrub Lmt.) 1xx
3 920056 Nut, 6-32 ESNA 6 x x
4 47405A Switch, Brush (Head Up) 1 x x
5 85519A Screw, ¼-20 x
3
/8 PN 4 x x
6 69434A Switch Bracket 1 x x
7 81104A Nut, ¼-20 ESNA 2 x x
8 46508A Resistor (Traverse Res.) 1 x x
9 82501A Pin 2 x x
10 68661A Brush Plate 1 x
68670A Brush Plate 1 x
11 782002 Clamp 2 x x
12 34705A Brush Hose L.H.& R.H. 2 x
34704A Brush Hose L.H.& R.H. 2 x
13 722030 Hose Clamp 1 x x
14 980638 Washer, Lock
3
/8 8xx
15 170915 Screw, ¼-20 x
3
/4 8xx
16 962714 Screw,
5
/16-18 x
3
/4 Soc 2 x x
17 82508A Pin 1 x x
18 833802 Gimbal 2 x x
19 962495 Screw, ¼-20 x 1 Pn 6 x x
20 Pg 23 Brushes & Pads 2 x x
21 34400B Gimbal 2 x x
22 836711 Hairpin 3 x x
23 838502 Splitter, Water 1 x x
25 915102 Key 1 x x
26 45037A Motor, Brush
(ref. to pages 36 & 37) 2 x x
27 41601A Connector 2 x x
28 920365 Nut, ½-13 ESNA 8 x x
29 63058A Linkage Bar 4 x x
30 962344 Screw, ½-13 x 1¼ HX 2 x x
31 67705B Sleeve Bearing 8 x x
32 41602A Connector Housing 2 x x
33 Pg. 33 Solution Hose ref. #4 1 x x
34 38708A Nylon Washer 2 x x
35 67703A Head Pressure Sleeve 1 x x
36 82404A Spirol Pin,
3
/16 3xx
CLARKE TECHNOLOGY Vision 21i - Vision V
Brush Head Assemby Parts List 9/98
Vision 21i Vision V
*NOTE: #67 used with screws #62 only as needed to square
up linkage bars #29.
Vision 21i Vision V