Specifications

ELECTRICAL CONNECTION

Connect the three core mains lead to a suitable industrial supply isolator, or heavy

duty plug. These chargers must be connected to a supply having a rated

capacity of greater than 13 Amps.

WARNING: A 13 Amp (BS1363) plug is not suitable.

The maximum input amperages for these units are:

BC260 - 30amps, BC330 - 36amps, BC420 - 48amps

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead are coloured in accordance with the

following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the flexible cord of this appliance may not correspond with the

coloured markings identifying terminals in your plug proceed as follows:

• Connect GREEN & YELLOW coloured cord to plug terminal marked with a

letter ‘E’ or Earth symbol ‘

’ or coloured GREEN or GREEN & YELLOW.

• Connect BROWN cord to terminal marked with a letter L or coloured RED

• Connect BLUE cord to terminal marked with a letter N or coloured BLACK

If in doubt, consult a qualified electrician.

PARTS IDENTIFICATION

A - Current Control Knob

B - Ammeter

C - Thermal Overload

Indicator

D - Mains Indicator Lamp

E - Timer Control Knob

F - 12 V Positive Terminal

G - 24 V Positive Terminal

H - Fuse

Fig. 1