User manual

(A) Safety Instructions

ET9000 has been designed and manufactured in compliance with EU consumer safety requirements (CE).

Please read the following safety precautions carefully !

1. Connecting Power

• This product operates only in the range of AC 95V~250V and 50Hz/60Hz. Please check first your power

supply to see if it fits this range.

• Please be noted that you need to disconnect from the mains before you start any maintenance or

installation procedures.

• Make sure that the power cord is placed in a position where it is easy to unplug it from the mains in an

emergency.

2. Overloading

• Do not overload a wall outlet, extension cord or adapter as this may cause electrical fire or shock.

3. Liquid

• This product is not water-proof and should not be exposed to dripping, splashing, or any type of liquid.

• No objects filled with liquid such as base shall be placed on the product.

• Please do not clean the product with wet cloth, which may cause a short circuit.

• No wet objects should be placed near the product.

4. Ventilation

• The heat generated in this unit is adequately dissipated. However, the unit should never be installed in a cupboard

or on shelves with inadequate ventilation. Never cover the cooling slots on the unit (e.g. with other equipment,

magazines, tablecloths or curtains)!

• Do not place any objects on top of the unit and maintain a clearance of at least 10 cm above the unit, so that the

heat generated can be dissipated with no obstructions.

5. Connecting the Satellite Cable

• Disconnect the power of the product before you connect the satellite cable to the product.

Otherwise, it may cause damage to the LNB.