BENCH GRINDER MODEL Nos.
TECHNICAL DATA CBG6RL Grinding Wheel Size Grade of Grinding Wheel Power Supply Motor size Speed (RPM) Weight-packed Part No. 2x150x20x12.7mm 1 x Grit Size 36 1 x Grit Size 80 230V 50Hz 1ph 250W 2,950 12kg 6500500 CBG6RSC & CBG6RR Grinding Wheel Size Grade of Grinding Wheel Power Supply Motor size Speed (RPM) Weight-packed Part No. 2x150x20x12.
Thank you for purchasing this CLARKE BENCH GRINDER, which is designed for DIY and general workshop use. Before attempting to operate this machine, please read this instruction manual thoroughly and follow all directions carefully. By doing so you will ensure the safety of both yourself and others around you, and at the same time, you should look forward to long and trouble free service from your Bench Grinder.
8. WEAR THE PROPER APPAREL. No loose clothing, gloves, neckties, rings, bracelets, or any other jewellery which might get caught in moving parts. Non-slip footwear is recommended. Long hair should be contained. 9. ALWAYS USE SAFETY GLASSES. Everyday glasses only have impact resistant lenses, they are not safety glasses. Also use a face mask if a lot of dust is generated. 10. DO NOT OVERREACH. Keep a firm footing and proper balance at all times. 11.
ELECTRICAL CONNECTIONS Connect the mains lead to a standard, 230 volt (50Hz) electrical supply through a fused good quality 13 amp BS 1363 plug, or a suitable fused isolator switch.
PRE-ASSEMBLY CHECK Before assembling your Bench Grinder, please check to ensure that all the parts listed below have been included. If any parts are missing or damaged, you should immediately contact your local dealer or CLARKE International on 0181-558 6696 for replacement. 1. Main Body (switch and power cable with plug are included. Additionally, the CBG6RL and 8RL models include a lamp assembly complete with bulb). 2.
rotation. As the wheel wears down with use, it will be necessary to re-adjust the brackets accordingly. 3. Assemble the Eye Shields on to the Spark Arrester Brackets using the nuts, bolts and washers supplied, in the manner shown in fig. 3. The angle of the Eye Shields are adjustable to suit the operator. 4. Your Clarke Bench Grinder should be securely bolted to a workbench before operation, using the pre-drilled holes in the base. 2 x 5/16" (8mm) bolts are recommended. (Not supplied) Fig. 1 Fig.
brackets from time to time. Adjustments can be made by loosening the mounting screw, and positioning the bracket accordingly, remembering to re-tighten the screw once adjustment is complete. The see-through Eye Shields allow the user to see the operation clearly, and to work precisely. The eye shields can be adjusted on their pivots to suit the operator. IMPORTANT: Even though Eye Shields are fitted, you should nevertheless, ALWAYS wear safety goggles when operating a grinding machine. B.
PARTS DIAGRAM 8
PARTS LIST 6RSC 6RWC 6RL 6RR 6RRW Qty Qty Qty No. Description Part No.
Parts List cont. No. Description Part No.
