Specifications

8
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
BEFORE USE
MOUNTING THE GRINDER ONTO A WORKBENCH
NOTE: We highly recommend that you bolt this bench grinder securely to a
workbench to gain maximum stability for your machine.
1. Using the base of the bench
grinder as a template, mark the
bench through the holes in the
casting.
2. Bolt the bench grinder on the
bench with bolts, washers and nuts
(not supplied).
3. To reduce vibration, mount the
bench grinder on a vibration
absorbing mat.
INSTALLING THE TOOL RESTS
1. Fix the tool rests to the bench
grinder, with the screw and hand
knob as shown.
• The tool rests are adjustable
and should be positioned 1.5
mm from the grinding wheels.
• Ensure that the tool rest is firmly
fixed and horizontal.
• One of the tool rest has a angled grove to allow you to sharpen the
ends of drill bits.
INSTALLING THE SPARK DEFLECTORS
Fit both the spark deflectors to the
wheel guards using the screws
provided.
Adjust the spark deflector frequently
to compensate for wear of the wheel,
keep the distance between the spark
deflector and wheel as small as
possible and never more than 2mm.
CBG6250 Bench Grinder.fm Page 8 Wednesday, August 31, 2011 11:06 AM