Instruction manual

9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
MAINTENANCE
The stapler/nailer does not require any specific maintenance other
then keeping it free from any dirt or debris. This can be done using a
clean dry cloth and/or brush. Do not use solvent or alcohol based
cleaner as it could damage the casing.
There are no user serviceable parts on the stapler/nailer. If there is a
problem please contact your nearest CLARKE dealer.
Do not open the casing, the guarantee will be void if the casing has
been opened or if the stapler/nailer has been tampered with.
The use of parts other than CLARKE replacement parts may result in
safely hazards, decreased tool performance and will invalidate your
warranty.
WARNING: SWITCH OFF THE STAPLER/NAILER AND REMOVE THE PLUG
FROM THE MAINS POWER SUPPLY BEFORE CARRYING OUT ANY
SERVICING OR MAINTENANCE