Specifications

4
Parts & Service: 020 8988 7400/E-mail:[e-mail] or [e-mail]
SAFETY PRECAUTIONS
WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL
INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND
/OR SERIOUS INJURY. THE TERM” POWER TOOL” IN ALL WARNINGS
REFERS TO YOUR CIR220 IMPACT WRENCH.
WORK AREA
a. Keep the work area clean and well lit. Cluttered and dark areas invite
accidents.
b. Do not operate power tools in explosive atmospheres such as in the
presence of flammable liquids, gasses or dust. Power tools create sparks
which may ignite dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
a. Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges or refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
b. Do not expose power tools to rain or wet conditions. Any water entering
power tools will increase the risk of electric shock.
c. When operating a power tool outdoors, use an extension cable suitable
for outdoor use. Use of a cable suitable for outdoor use reduces the risk of
electric shock.
PERSONAL SAFETY
a. Stay alert, watch what you are doing and use common sense when you
are operating a power tool. Do not operate a power tool when you are
tired, ill or under the influence of alcohol, drugs or medication. A moment
of inattention while operating a power tool may result in personal injury.
b. Use safety equipment. Always wear eye protection. Safety equipment
such as a dust mask, non-skid shoes or hearing protection used for
appropriate conditions will reduce personal injuries.
c. Avoid accidental starting. Ensure the switch is in the off position before
plugging the machine in to the power supply.
d. Do not over-reach. Keep your proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.