Use and Care Manual

7/2014 A - 9 56091128 - MA50 15B
ENGLISH - AINSTRUCTIONS FOR USE
BRUSH /PAD DRIVER CLEANING
CAUTION !
It is advisable to wear protective gloves when cleaning the brush/pad because there may be sharp debris.
Remove the brush/pad as shown in “Machine Use” section.1.
Clean and wash the brush/pad with water and detergent.2.
Check the brush bristles for integrity and wear. If necessary, replace the brush.3.
Check the pad for wear. If necessary, replace the pad driver.4.
RECOVERY TANK MAINTENANCE
CAUTION !
It is advisable to wear protective gloves when cleaning the tank and vacuum/suction assembly because there may be sharp debris.
Move the machine to the appointed draining area.1.
Turn off the main switch.(47)2.
Remove the recovery tank, (2) clean and rinse both solution/recovery tank, and drain out.3.
Remove vacuum gasket & fi lter. Clean and re-install.4.
Check the recovery tank lid gasket and the vacuum rubber connector (18) for wear. Replace if necessary.5.
NOTE
The gasket ring of recovery tank and the rubber connector between two tanks create vacuum in the tank. If necessary, replace them.
TECHNICAL DATA
MODEL MA50 15B
Machine length / width / height 770x500x550MM
Solution tank capacity 15L
Recovery tank capacity 15L
Wheel diameter 254MM
Brush motor 24V/250W
Vacuum motor 24V/250W
Solenoid valve 24V
Maximum gradient when working 2%
Sound level 70dBA
Standard Batteries Dry:（2×12V）24V 33Ah
Batteries size 196 x 130 x 175mm
Power cable length N / A
Cleaning productivity 750m2/hour
Squeegee width 490mm
Brush diameter 380mm
Brush rpm 150rpm
Charger Input 110-224Vac,50-60HZ；Output 24Vdc,5A
Machine net weight 60kg
Machine weight(with charger and package) 65kg
Carton spec 780x415x590MM