Specifications

OPERATION

• Ensure the workpiece is securely clamped.

• To switch the tool ON, press the lock-off button (A) fully and pull the ON/OFF switch (B).

To switch the tool OFF, release the ON/OFF switch.

• Set the planing depth (Fig. 1) by turning the adjustment knob (C) until the desired

planing depth is reached.

The planing depth can be read from the scale arounf the knob.

• Hold the machine with both hands using both grips. This ensures optimum control over

the machine.

• Ensure the cutters have reached full speed before they touch the workpiece.

• Guide the machine at a constant speed across the material to be worked. Do not

move too quickly - allow the machine enough time to plane the workpiece.

• For large surfaces it is recommended to make several shallow cuts at a smaller planing

depth.

• Remove the machine completely from the workpiece after use before switching off.

• Lay the machine on its side when placing down.

A. Lock - OFF switch

B. ON/OFF switch

C. Planing Depth Adjuster knob

D. Adjustable plate

E. Rebate Fence Assembly

F. Drive Gear Cover

G. Dust Bag

H. Rebate Depth Gauge

Fig.2