Specifications

3
OVERVIEW
The CON15 Coil Nailer is suitable for use on softwood, hardwood, plywood,
hardboard, fibreboard or MDF, and will penetrate flexible plastics, leather,
fabrics, PVC & rubber sheet materials. It is not suitable for piercing hard
laminates, brittle plastics or metals (other than light foil).
Unpack and lay out the components, checking against the following list. Any
damage or deficiency should be reported to your Clarke dealer immediately.
• Coil Nailer
• Oil Bottle
• 4 x Hexagonal Keys (3 ,4, 5 & 6mm)
• 1 x Nail Roll
• Black Moulded Case
• Operators Manual (this document)
Your Coil Nailer has been designed to give long and trouble free service. If,
however, having followed the instructions in this booklet carefully, you
encounter problems, take the unit to your local Clarke dealer.
TECHNICAL SPECIFICATION
erutaeF noitacificepS
thgieWgk4
mm)hxwxl(snoisnemiD553x031x033
erusserPriAgnitarepO)rab9.6-8.4(isp001-07
erusserPriA
xaM)rab2.8(isp021
deepSevirDnim/slian003
noitpmusnoCriAdesserpmoCmfc5.6
noitcennoCenilriAelamPSB"4/1
yticapaC
enizagaMslian003
Please note that the details and specifications contained herein, are correct at the
time of going to print. However, CLARKE International reserve the right to change
specifications at any time without prior notice.