Owner`s manual

11
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
ASSEMBLY
• Unpack and check for damage which may have occurred in transit.
• Place the saw on a flat and firm surface.
FIT THE RIGHT EXTENSION TABLE
1. Remove the screws from the end
of the slide bars.
2. Push the slide bars into the holes
under the table.
3. Replace the screws on the end of
the slide bars.
• Adjust the right extension table
as required then tighten the
extension locking screw under
the table to lock the right
extension table in place.