FAN HEATER Models: DEVIL 4040 • 4060 • 4100 • 4120 OPERATING & MAINTENANCE INSTRUCTIONS 0905
DECLARATION of CONFORMITY We declare that this product complies with the following standards/directives: • • 73/23/EEC 98/336/EEC Serial/Batch No: See Data Plate signed Engineering Manager SPECIFICATIONS Model Number Devil 4040 Devil 4060 Devil 4100 Devil 4120 Input 230V 50hz 1ph 400V 50hz 3ph 400V 50hz 3ph 400V 50hz 3ph Output Rating 3kW 5kW 9kW 15kW Supply Fuse Rating 13A 15A 15A 25A Dimensions (mm) 260x260x410 3 360x280x380 3 440x330x490 3 480x370x520 1700m3/h Air Output 510
Thank you for purchasing this Clarke Fan Heater. Before attempting to operate the unit please read this instruction leaflet and carefully follow all directions given. By doing so you will ensure safe operation of the unit and you can also look forward to it providing you with long and trouble free service. GUARANTEE This CLARKE product is guaranteed against faults in manufacture for 12 months from purchase date. Please keep your receipt as proof of purchase.
ELECTRICAL CONNECTIONS Devil 4040 This model is provided with a 13 amp BS 1363 plug, fitted with a 13amp fuse and MUST be connected to a standard, 230 Volt (50Hz) electrical supply, preferably through an approved plug , or a suitably fused isolator switch. WARNING! THIS APPLIANCE MUST BE EARTHED IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Green & Yellow ................................ Earth Blue ....................................................
WARNING! IF YOU ARE IN ANY DOUBT ABOUT ELECTRICAL CONNECTIONS, CONSULT A QUALIFIED ELECTRICIAN. DO NOT ATTEMPT ELECTRICAL CONNECTIONS or REPAIRS YOURSELF. OPERATION With the heater suitably sited (ensure you comply with all safety precautions), switch the heater ON to either fan only, half or full output (see illustration below). A temperature control switch (A) is also provided for fine control of heat output. Should the unit overheat, a thermal cutout will operate, shutting down the unit.
SPARE PARTS - DEVIL 4040 6
SPARE PARTS - DEVIL 4040 No. Description 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34.1 34.
SPARE PARTS - DEVIL 4060 8
SPARE PARTS - DEVIL 4060 No. Description Qty 1.1 1.2 1.3 1.4 2.1 2.2 3.1 3.2 3.3 3.4 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 32 32 32 32 32 32 32 32 32 32 32 Screw M4x16 ............................................................. 1 ................. DE4510807 Motor 12w/230v ........................................................ 1 ................. DE4510306 Fan .............................................................................. 1 .................
SPARE PARTS - DEVIL 4100 10
SPARE PARTS - DEVIL 4100 No. 1.1 1.2 1.3 1.4 2.1 2.2 3.1 3.2 3.3 3.4 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 32 32 32 32 32 32 32 32 32 32 32 Description Qty Screw M4x16 .................................................................... Motor 16W/230V .............................................................. Fan ..................................................................................... Washer 4,3 12mm .............................................
SPARE PARTS - DEVIL 4120 12
SPARE PARTS - DEVIL 4120 No. Description Qty Part No. No. Description Qty Part No. 1.1 Screw M5x14 1 DE4510825 23 Capillary Thermostat 1 DE4510416 1.2 Nut M4 4 DE4510808 24 Heating Element 2500W 6 DE4510355 1.3 Fan Guard 1 DE4510166 25 Relay 2 DE4510402 1.4 Motor 25W/230V 1 DE4510304 26 Overheat Sensor 1 DE4510404 1.5 Fan 1 DE4510314 27 Temp Limiter 1 DE4510405 1.6 Washer 5,3 20mm 1 DE4510824 28 Plug 1 DE4510411 1.7 Screw M4x60 4 DE4510833 29 Data Plate 1 N/A 2.
WIRING DIAGRAMS Devil 4040 Devil 4060 4100 14
Devil 4120 LEGEND W..............Switch T...............Thermostat M..............Motor PK.............Relay WR...........Temperature Limiter L...............Coil WZ............Overheating Sensor R1 - R6.....Heating Elements PARTS & SERVICE PARTS & SERVICE TEL: 020 8988 7400 or e-mail as follows: PARTS: Parts@clarkeinternational.com SERVICE: Service@clarkeinternational.