Technical data

135
Chemical mixing system
The advantages
• Reduced costs and risk
• Eliminate concentrate usage from residual build-up in the solution
tank due to un-used solution at the end of the shift.
• No over usage from mistakes in computation or measuring.
• Achieving the consistent required cleaning results without re-work or
penalty.
• Faster filling time, the operator can spend time cleaning instead of
filling the tanks.
• Eliminate unnecessary trips back to a re-filling area where the concen-
trate is located, just fill the solution tank where water is available.
What does it do?
Automatically mixes chemical stored in an on-board
container with clean water stored in the machine’s solution
tank, and delivers the mixed solution to the brush deck for
scrubbing application. Concentrate is mixed at an operator
preset amount of 0 to 3.3 litres per minute.
The machine control maintains this proportion through the
full range of the machines solution setting.
How does it do it?
Concentrated chemical is pumped from the chemical container
on command from the machines controller to a mixing point
with clean water from the solution tank. A proportioning valve
regulates the mixture by command from the controller.
What does the Operator need to do?
The concentrate container holds enough chemical to last for
several tanks of water. The operator should simply fill the
concentrate tank with the appropriate chemical at the
beginning of the shift, and check to see that the concentrate
knob is set to the corresponding color setting for the required
proportioning. Then fill the solution tank with clean water.
No measuring is required.