Technical data

The wide bore and special design of the quick release fittings will allow
a far greater air flow to the gun. In a simple experiment using a
conventional 8 mm hose and one of these 9 mm hoses connected to a
“Y” fitting it was found that the 9 mm hose delivered almost twice
the volume of air. Using these lightweight and very flexible hoses may
help to solve the struggle to find a small portable compressor that
delivers enough air volume to your spray gun. By the way, if you are
using 9 mm bore hoses on Clarke compressors, don’t tighten them up
too hard but use some PTFE tape to make the threads seal. If you
tighten them, the air will not flow!
9 mm Bore Air Hose A good quality very
flexible and lightweight 10 m hose with quick
release couplings on each end. Plugs straight into
the Fini Pioneer 265M Compressor [page 1.67].
9 mm Bore Hose code list price
10 m SATAMIM1030 £82.40 £77.74
9 mm Quick Fitting Female Female quick
release to suit most compressors. [1/4”BSP].
Female Compressor End code price
SATA13599 £13.00
9 mm Quick Fitting Male Male quick
release to suit most hoses. [1/4”BSP].
Male Compressor End code price
SATA13623 £13.50
Gun End Quick Fitting Quick release to suit
most guns. [1/4”BSP Thread].
See also the SATA Turbo Nozzle on page 1.72
Gun End Fitting code price
Female (most common) SATA13656 £5.84
Male
SATA53942 £6.70
Swivel for Spray Guns A very useful
attachment for the SATA guns, the swivel allows the
hose to move freely without kinking.
Swivel for Spray Guns code price
For all SATAjet guns (non-digital topcoat guns) S
ATA19745 £27.00
For all digital guns, SATAminijet, 1000 & 100 series SATA16162 £26.50
Nipple Male BSP Useful to convert
a female fitting to a male one or to convert
a 1/2” wall outlet to 1/4” BSP thread.
Tapered threads.
Nipple Male code price
1/4” to 1/4” TOL103014 £1.20
1/
4” to 1/2” TOL103016 £2.40
Push-fit converter This adaptor will
allow 8 mm hoses with standard push fittings to
be fitted to the Pioneer 265M and Big Pioneer compressors.
Push-Fit Converter code price
TOL845K £9.30
8 mm Bore Air Hose High pressure [300 psi] round rubber
hoses with 1/4” BSP swivel nut fittings. If you are using HVLP spray
equipment you may consider upgrading to 9 mm hoses which are listed
on the previous column.
8 mm Bore Air Hose code price
10 m TOL822H £11.45
15 m
TOL823H £17.20
30 m TOL820H £29.90
Worm drive hose clips GEN051 [11 - 16 mm] £0.51
1/4” Hose Fittings for 8 mm Bore Air Hose
Endless fun and confusion! As a bit of a guide, this is what you would
need if you want to couple a compressor with 1/4” male thread to a
spray gun using quick release fittings. Mount a “snap female body”
onto the compressor, put a “snap male adapter” into one end of the
hose. The hose will now snap onto the compressor. Put a “snap male
body” onto the other end of the hose and a “snap female adapter”
onto the gun. The gun will now snap onto the hose. Easy peasy! To
simplify things just order the top four listed below.
Fittings code price
Snap female body TOL842 £3.58
Snap male adapt
er TOL831 £1.25
Snap male body TOL841 £3.58
Snap female adapter TOL832 £1.25
Snap hose adapter TOL833 £1.25
1
/4” hose adapter TOL824 £0.95
Tail
1
/4” nut TOL844 £0.95
Hose joint TOL843 £1.25
Y Connectors Available either
complete with snap fittings ready to
take standard 8 mm bore air hoses
[when fitted with snap adapters] or as a plain
fitting with female 1/4” BSP threads on all outlets.
Type code price
Y Connector with fittings TOL8Y £11.95
Y C
onnector plain TOL103301 £3.00
6 mm Coiled Air Hose Useful for
running small spray guns when the air outlets
are ceiling-mounted. 6 mm bore with 1/4” BSP
screw connectors on each end. Max working pressure 150 psi [10.5 bar].
6 mm Coiled Air Hose code price
7.5 m TOL3110458 £5.40
P.T.F.E. Tape Used to lubricate and seal air hose joints.
P.T.F.E. Tape code small roll
TAP077 £0.80
Flints, Queens Row, London, SE17 2PX T: 020 7703 9786 F: 020 7708 4189 www.flints.co.uk
SECTION 1
1.68
AIR HOSES AND FITTINGS
9 mm BORE HOSES [FOR SATA] 1/4” BSP THREADS
Male
Female
Compressor to gun snap connectors
à
à
à
à
6 mm BORE HOSES 1/4” BSP THREADS
P.T.F.E. TAPE
8 mm BORE HOSES 1/4” BSP THREADS
8 mm BORE AIR HOSE FITTINGS 1/4” BSP THREADS
PIONEER CONVERTOR
Tradeline