Technical data

Flints, Queens Row, London, SE17 2PX T: 020 7703 9786 F: 020 7708 4189 www.flints.co.uk
SECTION 1
1.70
SATAjet 100 B F RP
This is a really
excellent reduced-pressure gun at a fantastic
price. When operated at around 0.5 bar with the
material flow set to high it produces an
excellent large splatter effect. These effects
need lots of paint so please ensure your paint
is diluted enough to flow really freely and make
sure the breather in the air cap is clear to avoid
any suction. When operating at the
recommended pressure of 1.5 – 2 bar the gun
provides a controlled spray pattern and rapid
even coverage. The air consumption matches the small portable
compressors typically used by freelance scenic artists. For scenic work
this is an excellent choice of gun. TECHNICAL DATA Inlet Pressure: 1.5 – 2 bar
[21.8-29psi]. Air Consumption: 290 Nl/min – 245 Nl/min [7.1 cfm]. Spray Distance: 180 – 230
mm [7 – 9 inches]. Nozzle Size can be increased to 2.5 mm see SATAjet 100 BP below.
SATAjet 100 B F RP Standard Set-up Choose this
version for maximum versatility. Nozzle size 1.6 mm. Our biggest
selling gun.
SATAjet 100 B F RP Standard Set-up code list price
Gun 1.6 mm nozzle & 0.6 L cup SATA145193 £249.00 £199.20
Gun 1.6 mm no
zzle & 0.75 L ali cup SATA146134 £250.00 £200.00
Spar
e 0.6 L cup SATA27243 £47.00
SATAjet 100 B F RP Scenic Set-up Extra large 2 mm
nozzle for very high material flow rates.
SATAjet 100 B F RP Scenic Set-up code list price
Gun 2 mm nozzle & 0.6 L cup SATA145219 £249.00 £199.20
Gun 2 mm no
zzle & 0.75 L ali cup SATA147421 £250.00 £200.00
Spar
e 0.6 L cup SATA27243 £47.00
SATAjet 100 B P Any waterborne and
solvent-based material available on the
market can be sprayed without restrictions
using this spray gun which was designed for
spraying polyester fillers. The huge 2.5 mm
nozzle enables fantastic splattering effects to
be performed at speed but the gun will also
cope with applying layers of Idenden Spraycote
and, of course, spray fillers. This gun is not
fitted with an air micrometer, flow should be
regulated at the compressor.
4 A specialist gun for spraying fillers and gesso
4 Correct atomisation for fillers etc. Very controlled application
4 Capable of large splatter effects when used at low pressure
TECHNICAL DATA Inlet Pressure: 2 bar [29psi]. Air Consumption: 245 Nl/min [8.7 cfm]. Spray
Distance: 180 – 230 mm [7 – 9 inches].
SATAjet 100 B P code list price
Gun 2.5 mm nozzle & 0.6 L cup SATA145185 £249.00 £199.20
Gun 2.5 mm no
zzle & 0.75 L ali cup SATA146217 £250.00 £200.00
Spar
e set up [also fits 100 B F RP] SATA145284P £93.20
SATAminijet 4400 B RP PVC
This is the latest version of the very popular
Minijet style of gun. This MiniJet 4400 is
slightly larger than the old 3000 version but
still compact and light in weight. With its
ergonomic handle shape, this is possibly the
most comfortable spray gun available. It is
often chosen because of its suitability for
detailed work but soon the user finds that it
is a very versatile gun for general work, too.
This new version is even more versatile with
the ability to produce a much wider spray pattern whilst still being
able to focus down to lines just a pencil thickness wide! Furthermore,
the 3000 model was restricted to small size cups [unless an adapter
was purchased] but this version will take all QCC quick cup connectors
including the RPS system. We have chosen to stock this RP version of
this gun which is more suited to scenic work. The air consumption of
7.1 cfm is based on the highest pressure setting, generally the air
consumption will be much lower.
TECHNICAL DATA Inlet Pressure: 0.5 - 2.5 bar [7 – 36 psi]. Air Consumption 200 Nl/min – 245
Nl/min [7.1 cfm] at 2.5 bar. Spray Distance: 120 – 190 mm. Wt: 293 g.
SATAminijet 4400 B RP [1.2 mm set-up] code list price
Gun 1.2 mm SR nozzle & .125 L cup SATA198226 £261.00 £208.80
Spar
e QC cup 0.125 L SATA197541 £44.60
Larger 0.6 L cup SATA27243 £47.00
Spares for SATAminijet 3000 B HVLP code price
RPS adapter for cups to 0.9 L SATA135798 £35.90
SATAjet 20 B Airbrush This
air brush is designed for fine detail and
artwork. Ideally suited for modelmaking and
stencilling. Most airbrushes are held like
pens and can be awkward to handle but this
SATA airbrush has the conventional grip that
most scenic artists are familiar with. It will
also cope with paints that small airbrushes
cannot handle. Air Consumption: 1.4 cfm.
This gun will operate using the very quiet
Shhhh..Air compressor listed on page 1.67.
Supplied with 65 cc gravity cup plus 25 cc
plug-in glass cup and 3 spare glass cups. Air
Pressure: 1 bar [14.5psi]. Tip: Please pull in the
trigger prior to screwing on the air cap or the
hard needle will wear away the softer air cap.
SATAjet 20 B Choose the 0.5 mm
version for the finest model work or the 1 mm
version for modelmaking and stencilling.
SATAjet 20 B code list price
Gun 0.5 mm nozzle & 0.6 L cup SATA86207 £295.00 £265.77
Gun 1 mm no
zzle & 0.6 L cup SATA86223 £295.00 £265.77
Spar
e 1 mm set up SATA61523 £67.30
SATAjet 100 B F RP
Great
price for a
superb gun!
SATAjet 100 B P for FILLERS AND GESSO
For
fillers and
splatters.
SATAminijet 4400 B RP PVC SPRAY GUN
Take
spots up to
.9L directly!
SATAjet 20 B AIRBRUSH
Take
a look at Ben Johnson’s
amazing paintings at
www.benjohnsonartist.com
Problems splattering?
Spray gun designers go to huge lengths to provide perfect paint atomisation, so to get a splatter effect we need to break all the rules! Set the air pressure
very low, say 0.5 bar, and set the material flow very high. The gun should splatter merrily away. However, it will need to use a large quantity of paint so it
is crucial that:
a) The breather hole on the air cap is not blocked or partially blocked to create suction. If in doubt take the cap off the lid.
b) The paint is sufficiently diluted to flow easily through the gun. It should be really sloppy.
c) If you want to splatter thick textured materials such as Crystalgel or Gesso then it is best to pressurise the pot [page 1.72]. Happy splattering!
Tradeline
Tradeline
Tradeline Tradeline
Tradeline