Technical data

Flints, Queens Row, London, SE17 2PX T: 020 7703 9786 F: 020 7708 4189 www.flints.co.uk
1.72
OTHER SPRAY EQUIPMENT
SATA BVD Pressurised Cup Add
this cup to your SATA gun to enable it to spray
viscous materials. It easily copes with Rosco
Crystalgel and Weave Filler. It is ideal for large
splatter effects using viscous paints on vertical
surfaces when diluted paint would tend to run.
Use it to apply texture to built pieces. For large
jobs see the 24 L pot below. Use it with a SATA
4000, SATA 3000, SATA 1000 or SATA 100 guns.
4 Transforms your existing gun into a brand
new.tool for amazing textural effects
4 Brilliant and r
epeatable control
4 Watch our video on YouTube
Please refer to Heavy Duty Springs on previous page.
Pressurised Cup code list price
SATA25775 £244.20 £220.00
SATA 24 Litre Pressure
Pot in Stainless Steel We
have selected this pressure pot for
projects which require large quantities
of paint or viscous material to be
sprayed. It can be used to prime large
cloths or to spray materials such as
Rosco CrystalGel and Weave Filler 1047
and to add texture effects to cloths or
scenery. It can also spray any viscous
paints to obtain heavy splattering
effects on vertical surfaces without
fear of the material running. This pot is suitable for water- or
oil-based materials and can be fitted to allow two guns to be operated
at the same time. If you are spraying materials which tend to settle,
the pot can be fitted with an automatic or manual agitator. These
pots are fitted with dual regulators for fine control of both air and
material pressure.
4 Dramatic time saving
4 Super fast spraying at unbelievable speeds
4 Ability to spray large quantities of many viscous materials
4 Two operators can work at the same time
4 Perfect control to obtain repeatable and even results
4 Ability to spray materials which would normally have to be hand
applied
Sata 24 L Pressure Pot code list price
24 L Pressure pot S
ATA177725 £1695.00 £1525.65
Surcharge for allowing second painter SATA181990 £251.90 £226.73
6 m material & compr
essed air line supply sets SATA77834 £206.80
10 m material & compressed air line supply sets SATA77842 £274.10
15 m material & compressed air line supply sets SATA77859 £335.60
[NOTE you will require 2 hose sets for twin gun set-up]
SATAjet 1000K Spray gun [2.5mm nozzle set] S
ATA153486 £359.00 £287.20
[NOTE you will require 2 guns for twin gun set-up]
Agitator Should the material that you are spraying be prone to
settle during the job it is possible to agitate the material in the
pressure pot either by hand or automatically with the air supply.
SATA Agitator code list price
Compressed air agitator SATA16477 £533.60 £480.28
Hand agit
ator for 24 L pot SATA3525 £160.40
Pro Spray Gun An economical and serviceable
gun suited to those who can’t warrant the extra
expenditure on the SATA guns. [1.4 mm nozzle].
Pro Spray Gun code price
TOL811 £27.54
PSC Spray Gun Suited for smaller compressors
and cheaper than a week’s hire! Don’t expect the quality
of finish you would get with a SATA gun.
PSC Spray Gun code price
TOL810 £19.95
Graco Air Texture Gun For
frequent users. Double-handle design
provides maximum support and control for
ceiling, wall and floor applications. Sprays
textures such as Rosco Foamcoat and most
gravity-fed materials.
4 5.7 L hopper
4 Air spray trigger gun
4 Four nozzles [4, 6, 8 and 12 mm]
Air Texture Gun code price
For frequent users TOL245924 £128.00
Clarke Air Texture Gun For one-off
jobs. High capacity unit for textured finishes. 7.8
L tough plastic hopper. 4 nozzles and 5 spray
patterns give 20 combinations. 45
0
offset
connector for spraying ceilings. Includes
instruction booklet with a truly alarming picture
of their hand model.
Air Texture Gun code price
For one-off jobs CLA5091120 £49.50
Blow Nozzles Valuable tools in any
workshop for clearing away dust prior to
glueing or painting. Unlike vacuum
cleaners, blow guns can get ingrained dust
out of shakes and screwholes preventing
paint contamination. Useful for cleaning
machines and motors. Choose between: The handy pocket-sized SATA
Turbo Blow Nozzle with rubberised protection – just clip it onto the 9
mm air hose, twist the front part to adjust the air flow and blow off.
Fits 9 mm quick fittings. Alternatively, use the Long Nozzle Gun to get
into nooks and crannies.
1
⁄4” BSP male thread connection.
Blow Nozzles code price
SATA Turbo nozzle SATA133306 £23.20
L
ong nose gun TOL825 £4.95
SATA Grit-blasting Grit-blasting gun
for small jobs complete with blasting tube with
6 mm carbide insert, material cup to hold around
1 L, and male 1/4” thread air connection.
TECHNICAL DATA Lifetime approx 500 hours. Wt: 0.8 kg. Material
grain size: 0.1 – 0.6 mm. Operating Pressure: 5 – 10 bar [73 – 150psi].
Grit-blasting Gun code price
SATA17335 £209.90
PRESSURE POTS & AGITATORS
My
favourite
toy.
A
real time
saver.
AIR TEXTURE GUNS [HOPPER GUNS]
BLOW NOZZLES
GRIT GUNS
SECTION 1
Tradeline
Tradeline
Tradeline
Tradeline
SATA Turbo Nozzle