PUDDLE PUMP MODEL No: PSP125 Part No: 7230692 OPERATION & MAINTENANCE INSTRUCTIONS 0308
SPECIFICATIONS Model number .................................................... PSP125 Rated voltage ..................................................... 230VAC 50Hz Input power ......................................................... 293 Watts Maximum delivery capacity ............................. 125 litres per minute Maximum head ................................................... 10.2 metres Maximum particle size ....................................... 3 mm Maximum Depth ............................
Thank you for purchasing this CLARKE puddle pump. Before using the pump, please read this manual thoroughly and follow the instructions carefully, in doing so you will ensure the safety of yourself and that of others around you, and you can look forward it giving long and satisfactory service. GUARANTEE 333 • This CLARKE product is guaranteed against faulty manufacture for a 33 of purchase. Please keep your receipt period of 12 months from the date as proof of purchase.
SAFETY INSTRUCTIONS KEEP CHILDREN AWAY: Do not allow children to touch the puddle pump, cables or connections. Visitors should be kept away from the work area. STORE IDLE TOOLS: When not in use, the puddle pump should be stored in a dry, secure place out of the reach of children. DISCONNECT TOOLS: Disconnect the puddle pump from the mains supply when not in use, or when making adjustments etc. REPAIRS: Have the puddle pump repaired by a qualified person. STAY ALERT: Watch what you are doing.
ELECTRICAL CONNECTIONS Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved 13 amp BS 1363 plug, or a suitably fused isolator switch.
PARTS IDENTIFICATION Multi hose fitting Carry Handle Control Switch Automatic (A) / Manual (M) Open (O) - See Maintenance Water Outlet Motor Housing Suction Base 6
RECOMMENDED USES The recommended uses for this pump are: • Drainage after flooding • The transfer of liquids • Drainage of containers • Taking water from wells and shafts Liquids that CAN be pumped: • Clean water 777 • Contaminated water (maximum particle size 3 mm) Note: always consider the outlet 77 hose diameter • Swimming pool water Note: After pumping chlorinated water or other liquids containing additives, the pump should be thoroughly rinsed with clean water • Soapy water Liquids that MUST NOT be
PREPARATION CONNECTING THE OUTLET HOSE WARNING! ENSURE THAT THE PUDDLE PUMP IS DISCONNECTED FROM THE MAINS POWER SUPPLY BEFORE CONNECTING THE HOSE. NOTE: The outlet hose is not supplied with the puddle pump. The puddle pump is supplied with a multi hose adapter(as illustrated), for use with 25 mm (1“) and 32 mm (1 -1 /4”) hoses, IMPORTANT! When screwing on the adapter, ensure the non-return valve is correcly located so that the flap opens upwards.
USING THE PUDDLE PUMP WARNING! BEFORE USING THE PUDDLE PUMP, CHECK TO MAKE SURE THAT IT IS NOT DAMAGED. DO NOT USE A DAMAGED PUMP. REFER TO QUALIFIED SERVICE PERSONNEL. 1 Connect an outlet hose. See page 8. • Make sure the outlet hose is clear of obstructions and not kinked. 2 The pumps are completely submersible, and should be placed in a vertical position, on a solid flat surface. If this is not available, sit the pump 999 ensure they are not likely to shift. a solid surface, eg.
CLEANING AND MAINTENANCE WARNING! MAKE SURE THAT THE PUDDLE PUMP IS DISCONNECTED FROM THE MAINS SUPPLY BEFORE STARTING ANY CLEANING, OR MAINTENANCE PROCEDURES. • Always keep the body of the pump, clean and free from dirt, sediment and debris. • If the base becomes clogged it must be disconnected from the mains and clean the base. • To gain access to the float compartment to check float functioning, and to clean the compartment etc.
