STAINLESS STEEL GAS BARBECUE MODEL NO: SSBBQ4 PART NO: 6925310 USER GUIDE 2/11
INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase.
WARNING AND SAFETY POINTS Please read the following points before using your barbecue. 1. Please follow all assembly instructions in this manual; failure to follow these instructions may result in serious bodily injury and/or property damage. 2. This barbecue will become very hot when in use; care is to be taken especially when pets, children or elderly people are present. 3. Do not use or store any flammable liquids or vapours in the vicinity when operating the barbecue. 4.
PARTS LIST NO DESCRIPTION PART NUMBER NO DESCRIPTION PART NUMBER 1 2 Left Side Table Grill Body ELBBQ4SS01 ELBBQ4SS02 12 13 Rear Panel ELBBQ4SS12 ELBBQ4SS13 3 4 5 6 7 Side Burner Table Drip Tray Warming Rack Cooking Grills Heat Distribution Plates ELBBQ4SS03 ELBBQ4SS04 ELBBQ4SS05 ELBBQ4SS06 ELBBQ4SS07 14 15 16 17 18 8 9 10 11 Side Burner Grate Top Door Bracket Left Door ELBBQ4SS08 ELBBQ4SS09 ELBBQ4SS10 ELBBQ4SS11 Left Side Panel 4 Right Side Panel Right Door Base Castors Bottom Door Br
ASSEMBLY TIPS • Remove all parts from the boxes and check if anything is missing according to the “Parts List” on page 4. • To assemble your barbecue you will need: a screwdriver, pliers and an adjustable wrench. • Assemble all nuts and bolts loosely at first. Tighten all connections once fully assembled. This increases the stability of your barbecue. 1. Connect Left Side Panel (11) and Right Side Panel (13) to the Base (15) as shown and secure using 8 x M6x12 Bolts (B) and 4 x Washers (C). 2.
3. Fit the Bottom Door Bracket (17) into position and secure in place using 4 x M6×50 Bolts (A) and 4 Washers (C). 4. Fit the Upper Door Bracket (9) into position and secure using 4 x M6×50 Bolts (A), 4 x M6x12 Bolts (B) and 8 x Washers (C).
5. Push the Castors (16) into position. 6. Get someone to help lift and position the Grill Body (2) as shown above and secure using 4 x M6x12 Bolts (B) and 4 x Washers (C).
7. Insert 4 x M6x12 Bolts (B) into the left side of the Grill Body as shown. • Do not insert them fully. 8. Slide the Left Side Table (1) over the bolts and push down to lock into place. 9. Insert 2 x M6x12 Bolts (B) and 2 x washer (C) as shown and tighten all the bolts.
10. Insert 4 x M6x12 Bolts (B) into the right side of the Grill Body as shown. • Do not insert them fully. 11. Slide the Side Burner Table (3) over the bolts and push down to lock into place. 12. Insert 2 x M6x12 Bolts (B) and 2 x washer (C) as shown and tighten all the bolts.
13. Fit the control knob to the side burner table as shown and secure using the two screws supplied. 14. Connect the side burner valve and secure using 2 screws, 15. Fit the Spark Electrode. 16. Place the Side burner Grate (8) into position.
17. Slide the Drip Tray (4) into position as shown above. 18. Fit the Doors (10 & 14) into position as shown.
19. Place the Heat Distribution Plates (7), Cooking Grills (6) and Warming Rack (5) into position. 20. Connect one end of the hose to the gas port on the BBQ and secure using one of the clips shown. 21. Connect the regulator to the other end of the hose and secure using the second clip.
BEFORE USE CONNECTING THE GAS BOTTLE You will need to purchase a LPG (Liquid Propane Gas) bottle to operate this barbecue. This can be obtained from your nearest gas retailer. WARNING: NEVER LEAVE THE REGULATOR ATTACHED TO THE GAS BOTTLE IF DISCONNECTED FROM THE GAS HOSE. 1. When changing your gas bottle, ensure that there are no sources of ignition close by i.e. fires, cigarettes, naked flame etc. Make sure that the barbecue is switched off. 2.
LIGHTING THE BBQ WARNING: READ ALL SAFETY INFORMATION IN THIS MANUAL BEFORE LIGHTING THE BARBECUE. 1. Turn all control knobs clockwise to the OFF position. 2. Open the gas valve on the LPG bottle. 3. Set the regulator switch to the on position (straight up). 4. Lift open the barbecue lid. 5. Push and turn a control knob anticlockwise to “HIGH” position, whilst pushing and keeping the electronic igniter pressed in for several seconds, it will generate sparks to light up the burner. 6.
DECLARATION OF CONFORMITY 15
