MODEL Nos: CVAC20SS•CVAC25SS• CVAC30SSR OPERATING & MAINTENANCE INSTRUCTIONS Distributed by CLARKE International Ltd.
Thank you for selecting this VAC KING Stainless Steel Vacuum Cleaner, which will provide you with a cleaner and safer working environment. This machine is capable of collecting both wet and dry materials as well as water. DO NOT, however, collect any other type of liquid as this could be dangerous. Before attempting to use this machine, please read this leaflet thoroughly and follow the instructions carefully.
ELECTRICAL CONNECTIONS This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for connection to a standard, domestic electrical supply. Should the plug need changing at any time, ensure that a plug of identical specification is used.
PREPARATION FOR USE PRERARATION FOR USE Fig.1 This is an illustration showing the CVAC20P, however all other models have similar components but may differ slightly in design. 1. Motor & Head section 2. Container 3. Flexible Hose 4. Extension Tube 5. Brush Adapter 6. Hose/Extension Tube Angle Adapter 7. Crevice Tool 8. Power Tool Adapter (CVAC30SSR only) 9. Casters 10. Cartridge Filter 11. Paper Dust bag. 12.
With the VAC King removed from the packaging, undo the two clamps securing the head and remove the components from within the tank. Lay them out and check to ensure that no damage was suffered in transit. For ease of mobility, all models are mounted on bases provided with castors. These rare simply pushed into their mountings firmly.
OPERATION • Before plugging in to the mains supply, open the machine and check to ensure the appropriate filters are securely in place, and are in good condition. If the paper bag is full...replace it. • REMEMBER, to use the FOAM FILTER ONLY for picking up WATER, and ensure that it is correctly fitted, so that it covers the filter cage completely. NOTE: Be aware that when picking up water, the tank will gradually fill up.
SPECIFICATIONS CVAC20SS CVAC25SS CVAC30SSR Motor - Power Rating ................ 1.4kW ................. 1.4kW ................. 1.4kW Voltage .................. 230V 50Hz 1Ph ... 230V 50Hz 1Ph ... 230V 50Hz 1Ph IP Rating ........................... 24 ....................... 24 ....................... 24 Insulation Rating ............... E ......................... E ......................... E Duty Cycle ........................... S1 (Continuous) .. S1 (Continuous) .
