Instruction manual

5
• If the indoor weather station does not display these values after 1
minute, the signal search will try again every two hours until a signal is
found.
• Once the remote sensor temperature and humidity values are displayed
for 10 minutes you can place the sensor outdoors.
RADIO TIME SIGNAL
After the initial setup period, the weather station will start to search for a radio
time signal.
The time and date signal is sent by a highly accurate government-operated
atomic clock. The weather station will continually scan for the radio controlled
time signal each day.
• If reception is unsuccessful, then the radio time signal icon will not
appear and the manually entered time will be displayed. See page 9 for
instructions on how to enter the time manually.
• If reception has been successful, the radio time signal icon will be
shown and the received time and date will overwrite any manually set
time and date.