Instruction manual

MOUNTING

BASE STATION

• There is a folding stand at the

rear

of the base station, which

allows the unit to be stood onto

any flat surface.

• The base station may also be

wall mounted using the

hanging hole on the rear of the

unit.

NOTE: It is important to check that

the radio signal can be

received at the chosen location before permanently mounting

either of the units.

REMOTE SENSOR

NOTE: T

o obtain acurate temperature r

eadings, do not mount the

remote sensor in direct sunlight. We recommend that you mount

the sensor on an outside north-facing wall.

NOTE: Obstructions such as walls, concrete, and large metal objects will

reduce the transmitting range.

Use 3 screws to fix the wall bracket

to the wall.

2. Clip the sensor into the wall

bracket as shown.

The remote sensor will transmit the

outdoor temperature

and

humidity back to the weather

station.