Manual

ManualsBrandsClarus Environmental ManualsAccessories for waterWW1 High Water Alarm Bracket

SECTION: C2.00.110

CL0037

0711

Supersedes

NEW

3649 Cane Run Road

Louisville, KY 40211-1961

877

244

9340

Fax: 877

414

4316

www.clarusenvironmental.com

High Water Alarm Bracket

INSTALLATION INSTRUCTIONS

NOTICE TO INSTALLER: Instructions must remain with installation.

This High Water Alarm Bracket is designed for use with either the WW1 or WW4 efuent lters from Clarus Environmental.

1) Determine the most appropriate point of attachment on the efuent lter. Refer to the diagram below.

2) Determine the appropriate location of the mounting screw hole.

3) Fasten alarm oat bracket to lter using supplied stainless steel screw and washer. It is recommended

that a 1/8” pilot hole be drilled to make the screw easier to install.

4) Determine oat switch (sold separately) placement by adjusting oat holder and tether length. Ensure that the

oat motion is not obstructed by the lter housing.

5) Attach lter removal handle (optional).

6) To complete the installation, follow installation and wiring instructions included in the alarm pack or

control panel (sold separately). Recommended alarm pack – Clarus C-Pak, p/n 10-3067.

WW4 DELUXE EFFLUENT FILTER WW1 EFFLUENT FILTER

INSTALL ALARM FLOAT

BRACKET ON THE BACK

2 CARTRIDGES

ALARM FLOAT

BRACKET

S.S. WASHER AND

MOUNTING SCREW

THREADED PLUG

FLOAT

HOLDER ASSEMBLY

MOUNTING SCREW HOLE

FLOAT SWITCH

(SOLD SEPARATELY)

1/2" SCH 40 PVC

FILTER REMOVAL HANDLE

(OPTIONAL)

S.S. WASHER AND MOUNTING SCREW

MOUNTING SCREW HOLE

FLOAT

HOLDER ASSEMBLY

FLOAT SWITCH

(SOLD SEPARATELY)

ALARM FLOAT BRACKET

THREADED PLUG

SK2861

Summary of content (2 pages)

PAGE 1
Notice to installer: Instructions must remain with installation. CL0037 0711 Supersedes NEW 3649 Cane Run Road . Louisville, KY 40211-1961 877-244-9340 . Fax: 877-414-4316 www.clarusenvironmental.com ® ® SECTION: C2.00.110 High Water Alarm Bracket INSTALLATION INSTRUCTIONS This High Water Alarm Bracket is designed for use with either the WW1 or WW4 effluent filters from Clarus Environmental. 1) Determine the most appropriate point of attachment on the effluent filter. Refer to the diagram below.
PAGE 2
High Water Alarm Bracket Limited Warranty Manufacturer warrants, to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of one year from date of purchase by the end user, or 18 months from date of original manufacture of the product, whichever comes first.