User's Manual

English

Setting thetime, 12- or 24-hour clock and snooze time

1. Plug themains adaptor both into apower point and theclock’s power socket.

2. Press [ SET ]. The hours display will then begin to ﬂash. Press or hold in [ ▲ ] or [ ▼ ]

to set thehours.

3. Press [ SET ] again and theminutes display will begin to ﬂash. Press or hold in [ ▲ ]

or [ ▼ ] to set theminutes.

4. Press [ SET ]. The “12H” symbol will then begin to ﬂash. Press [ ▲ ] or [ ▼ ] to select

a12 or 24 hour time display.

5. Press [ SET ] again. The “05” symbol will begin ﬂashing. Press [ ▲ ] or [ ▼ ] to set

thesnooze time (5-60 minutes).

6. Press [ SET ] again to save settings and to return normal time display. If no button is

pressed for 10 seconds, theclock will automatically return to normal time display.

Note: If the12-hour clock display is chosen the“PM” symbol will be used for PM time

display. The “AM” symbol is not used or displayed.

Setting thealarm

1. Press[AL1•2].Both“A1”(alarm1)andthehoursdisplaywillbegintoash.

Press or hold in [ ▲ ] or [ ▼ ] to set thehours.

2. Press[AL1•2]again.Theminutesdisplaywillbegintoash.Pressorholdin[▲ ]

or [ ▼ ] to set theminutes.

3. Press[AL1•2]again.“OFF”willappear.Press[▲ ] or [ ▼ ] to select thetype of

alarm or “OFF”.

- rd: radio

- bu: buzzer

- OFF: No alarm

4. Press[AL1•2].Both“A2”(alarm2)andthehoursdisplaywillbegintoash.

Press or hold in [ ▲ ] or [ ▼ ] to set thehours.

5. Repeat steps 2 and 3 as listed above.

If you have selected theradio or buzzer alarm for alarm 1 and/or 2, either A1 and/or

A2 will be displayed depending on thecorresponding alarm/s you have chosen.

Switching thealarm off

1. Press[AL1•2]whenalarm1or2soundsinordertoturnoffthealarm.Thealarm

will go off again at thesame time in 24 hours time.

2. If [ NAP▲ ] or [ RADIO/SL ] is pressed when thealarm goes off, thenap function or

theradio will be switched on and thealarm will be switched off.

Snooze

Press [ ] to activate thesnooze function when thealarm goes off. The alarm

will sound again after ashort delay determined by theset snooze time, refer to

theSetting thetime, 12- or 24-hour clock and snooze time section above.