software v 6 00

26
CAT Wiring
Connector DT06-4S (C4) Terminal Sockets Position Wire Color Description 4-1 RED + 12 VDC 4-2 Black Ground 3 Plug NC 4 Plug NC Connector DT06-12S (C12) Terminal Sockets Position Wire Color Description 1 Red NC 2 White OEM Interlock 3 White High Idle 4 Brown CAT ID Input 12 VDC 5 Black Sensor Ground 6 Red Sensor Voltage 7 White Sensor Signal 8 Yellow Control Signal 9 Black NC 10 White PTO Interlock 11 Orange Enable Input 12 Blue Enable Output
Pressure Governor
12 VDC C4-1 CAT ID C12-4 C4-2 Ground
PWM Signal
C12-8
Enable Input
C12-11
Enable Output
C12-12
12 VDC
Pump Engaged
OEM Interlocks
FAST IDLE
High Idle C12-3
Throttle Ready C12-2
Pump Engaged C12-10
CAT ECM Terminals
68 Remote Accelerator 03 Input Sensor Common 56 PTO ON/OFF
Throttle Ready
ECU Power
High Idle Switch
Sensor Ground C12-5
Sensor Voltage C12-6
Sensor Signal C12-7
A Black Ground B Red +5 VDC C White Signal
Transducer Connector
Important: This governor utilizes the CAT ID input at terminal 12-4 to ensure proper operation.
Any questions should be directed to Class1 Support at 1-800-533-3569
Caterpillar Wiring