software v 6 00

27
C:\manuals\Uni-Gov-V6-107490
Navistar Wiring
Navistar Circuit ECM Pin 97DF Switch Voltage 12 VDC 1 Amp 97CC Variable Enable 36 99F Remote Sensor Output 30 97DD 5 Volt reference 05 97HM Reference Ground 06
Pressure Governor
Reference Voltage C12-1
Reference Ground C12-9
Control Signal C12- 8
Delay Rly 30 C12-11 Delay Rly 87 C12-12
Navistar Wiring
97DD Voltage Ref 5V 97HM Rem Acc. Return 99F Remote Sensor 97DF Switch Voltage 97CC Variable Enable
Important:
This governor version incorporates the Engine 5 Volt and Ground References.
IT WILL NOT OPERATE without these circuits wired as shown.
Any questions should be directed to Class1 Support at 1-800-533-3569
Navistar Governor Wiring
Connector DT06-4S Terminal Sockets Position Wire Color Description 1 RED + 12 VDC 2 Black Ground 3 Plug NC 4 Plug NC Connector DT06-12S Terminal Sockets Position Wire Color Description 1 Red 97 DD 2 White OEM Interlock 3 White High Idle 4 Brown CAT ID 5 Black Sensor Ground 6 Red Sensor Voltage 7 White Sensor Signal 8 Yellow Control Signal 9 Black 97 HM 10 White PTO Interlock 11 Orange Enable Input 12 Blue Enable Output
4-1 12 VDC 4-2 Ground
12 VD
C
Pump
Engaged
OEM
Interlocks
FAST
IDLE
High Idle C12-3
Throttle Ready C12-2
Pump Engaged C12-10
Throttle
Ready
ECU Power
High Idle Switch
Sensor Ground C12-5
Sensor Voltage C12-6
Sensor Signal C12-7
A Black Ground B Red +5 VDC C White Signal
Transducer Connector
Red Wire
Black Wire
Input 12 VDC