Owner manual

FORM-ENG-0018 REV A 05-27-03
PAGE
14 of 25
SUITABLE FOR EXTERNAL DISTRIBUTION
OPERATION MANUAL
DATE 9/24/2008
PRODUCT GROUP ITL40 P/N 118404-XX REV 1.00
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : [phone] or 1-800-520-3473
PRODUCT
Intelli-Tank Level 40
BY AMS
MANUAL P/N:118253 PRINTED: 1/8/09
4. Password list
RLLR LRRL
1 point calibration (section 3.3.1)
RLLR LLRL 2 point calibration, empty then full (section 3.3.2)
RLLR LRRR 2 point calibration, full then empty (section 3.3.4)
RLLR LRLR 5 point calibration (section 3.3.4)
RLLR RLLR 9 point calibration (section 3.3.5)
RLLR LLRR Self test (section 3.4)
LRLR LRLR Configure display as Remote display (section 2.3)
RLLR LLLR Configure dim level (section 3.5)
LLRR LLRR Display voltage (section 7.2)
LRLL LLLR Configure for 1-wire communications (section 3.7)
LRLL LLRL Configure for CAN communications (section 3.7)
LRRR LLLL Configure as Master display with CAN address 1 (section 3.7.3)
LRRR LLLR Configure as Master display with CAN address 2 (section 3.7.3)
LRRR LRRR Configure as Master display with CAN address 3 (section 3.7.3)
LRRR RLLR Configure as Master display with CAN address 4 (section 3.7.3)
LRRR LRLR Configure as Master display with CAN address PCM (section 3.7.3)
LRRR LLRL Configure as Remote display with CAN address 1 (section 3.7.4)
LRRR LLRR Configure as Remote display with CAN address 2 (section 3.7.4)
LRRR LRRL Configure as Remote display with CAN address 3 (section 3.7.4)
LRRR RLLL Configure as Remote display with CAN address 4 (section 3.7.4)
LRRR LRLL
Configure as Remote display for use with Pump Sensor Module, Tank 1
(section 3.7.4)
LRRR RLRL
Configure as Remote display for use with Pump Sensor Module, Tank 2
(section 3.7.4)
LRRR RLRR
Configure as Remote display for use with Pump Sensor Module, Tank 3
(section 3.7.4)
LRRL LRRL Slosh dampening feature enabled (section 3.10)
LRRL LRRR Slosh dampening feature disabled (section 3.10)
LLRR LLLL Reference mark turned OFF (section 3.9)
LLRR RRRR Reference mark turned ON (section 3.9)
LLRR LRRL Load defaults (remote, 1-wire, dim level 3, “CLASS 1” scroll, slosh dampening OFF)
LLLL LRLR Configure custom start-up text scroll (section 3.8)