Owner manual

FORM-ENG-0018 REV A 05-27-03
PAGE
17 of 25
SUITABLE FOR EXTERNAL DISTRIBUTION
OPERATION MANUAL
DATE 9/24/2008
PRODUCT GROUP ITL40 P/N 118404-XX REV 1.00
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : [phone] or 1-800-520-3473
PRODUCT
Intelli-Tank Level 40
BY AMS
MANUAL P/N:118253 PRINTED: 1/8/09
6. Wiring
6.1. ITL40 connector
The ITL40 has one connector and the following definitions apply:
Mating connector: Deutsch DT06-12SB BLACK
Mating sockets: Deutsch 0462-201-16141
Wedge lock: W12S Recommended wire gage: 16-18 AWG
PIN CIRCUIT DESCRIPTION
1 SUPPLY (+) (INPUT) – battery voltage (+9VDC…+32VDC)
2 CAN HIGH (DATA) – SAE J1939 CAN 2.0B, 250Kbits/s
3 CAN SHIELD (DATA) – SAE J1939 CAN 2.0B, 250Kbits /s
4 DIM DISPLAY (INPUT) – Dim display input (positive polarity)
5 Sensor REF (OUTPUT) – pressure sensor supply (+5VDC)
6 Sensor SIGNAL (INPUT) – pressure sensor signal (+0.5VDC to +4.5VDC)
7 Sensor GND (OUTPUT) – pressure sensor ground
8 ---- ----
9 1-WIRE SIG (DATA) – Class 1proprietary communication
10 GROUND (OUTPUT) – common ground
11 CAN LOW (DATA) – SAE J1939 CAN 2.0B, 250Kbits /s
12 SUPPLY (-) (INPUT) – battery ground
6.2. Pressure sensor connector
The pressure sensor has one connector and the following definitions apply:
Mating connector: Packard Metri-Pack 150 series, 12047909
Mating sockets: Packard Metri-Pack 150 series, 12103881
Recommended wire gage: 18-20 AWG
PIN CIRCUIT DESCRIPTION
A SUPPLY (+) (INPUT) – pressure sensor supply (+5VDC)
B SUPPLY (-) (INPUT) – pressure sensor ground
C Signal (OUTPUT) – pressure sensor signal (+0.5VDC to +4.5VDC)