User Manual

ManualsBrandsClass1 ManualsCar4 output tank level

page 1 of 5 pages

Engineering

Standards

Name

Identifier OEM Installation and Calibration

Engineering Standard Number

C1-105593

Four Output Tank Level

ISO 9001 CERTIFIED

E:\MANUALS\DIGITAL\TANKLEVEL\NEW T ANK LEVEL_ESN.P65_05062001

This document addresses the

Class1

Tank Level Gauge with four outputs and the installation,

calibration and operation of this unit.

The module has f our (4) positive (12 VDC) outputs capable of sourcing 7.5 Amperes each.

Output indications with tank level decreasing:

Full Light 3/4 Light 1/2 Light 1/4 Light

Full to 7/8 tank ON ON ON ON

13/16 to 3/4 tank Flash ON ON ON

3/4 to 5/8 tank OFF ON ON ON

9/16 to 1/2 tank OFF Flash ON ON

1/2 to 3/8 tank OFF OFF ON ON

5/16 to 1/4 tank OFF OFF Flash ON

1/4 and below OFF OFF OFF Flash

Output indications with tank level increasing:

Full Light 3/4 Light 1/2 Light 1/4 Light

1/8 and below OFF OFF OFF Flash

3/8 to 1/4 tank OFF OFF Flash ON

1/2 to 3/8 tank OFF OFF ON ON

5/8 to 1/2 tank OFF Flash ON ON

3/4 to 5/8 tank OFF ON ON ON

7/8 to 3/4 tank Flash ON ON ON

Full to 7/8 tank ON ON ON ON

Fault Indications:

1/4 and Full lights alternately flashing and COM LED flashing

Invalid calibration (recalibrate system)

1/4 and 1/2 lights rapidly counter flashing and COM LED flashing

Transducer Fault (check wiring and transducer)

3/4 and Full lights rapidly counter flashing and COM LED flashing

Transducer shorted to 5 v olts (check wiring and transducer)

1/2 and 3/4 lights rapidly counter flashing and COM LED flashing

System Fault (repower system, if prob lem repeats , recalibrate unit and if

the error is not resolved, replace display)

Summary of content (5 pages)

PAGE 1
Engineering Standards ISO 9001 CERTIFIED Name Four Output Tank Level Identifier OEM Installation and Calibration Engineering Standard Number C1-105593 This document addresses the Class1 Tank Level Gauge with four outputs and the installation, calibration and operation of this unit. The module has four (4) positive (12 VDC) outputs capable of sourcing 7.5 Amperes each.
PAGE 2
Engineering Standards ISO 9001 CERTIFIED Name Four Output Tank Level Identifier OEM Installation and Calibration Engineering Standard Number C1-105593 Tank Level Gauge Transducer Installation Harness 5’ PN 105597 10’ PN105598 20’ PN105599 FLUID TANK Pressure Transducer 1/4 NPT Adapter 3/4-1/4 NPT Bushing (OEM) Foam adapter is supplied when a foam level system is ordered. 3/4 NPT Elbow (OEM) The transducer must be mounted vertically as depicted to insure an accurate and reliable reading.
PAGE 3
Engineering Standards ISO 9001 CERTIFIED Name Four Output Tank Level Identifier OEM Installation and Calibration Engineering Standard Number C1-105593 The module is waterproof and can be mounted in almost any location. Avoid areas of Extremely high temperature (above 75 deg C) and/or high vibration. Connector Deutsch DTM06-12SA 1 2 3 4 5 6 Connector information: Terminal 0462-201-20141(18-24 Ga.) 1062-20-0122 (10-16 Ga.
PAGE 4
Engineering Standards ISO 9001 CERTIFIED Name Four Output Tank Level Identifier OEM Installation and Calibration Engineering Standard Number C1-105593 Pressed Not Pressed OFF CONN1 R5 LED1 ON R3 R2 Flash TP1 Press and hold both switches for two (2) seconds. Both LED's will illuminate. LED2 LED3 FULL EMPTY TP2 TP3 CALIBRATE U10 U12 SW3 U13 FT3 U11 Z1 LED2 FULL Release both switches. Both LED's will Flash at the same time.
PAGE 5
Engineering Standards ISO 9001 CERTIFIED Name Four Output Tank Level Identifier OEM Installation and Calibration Engineering Standard Number C1-105593 Pressed Not Pressed OFF ON Flash Volume Calibration For Volume Calibration, enter the following password EMPTY FULL EMPTY FULL EMPTY EMPTY EMPTY EMPTY SW2 SW2 SW2 SW2 SW2 SW2 SW2 LED2 LED3 FULL EMPTY CALIBRATE LED3 FULL EMPTY LED3 FULL EMPTY SW3 LED2 LED3 FULL EMPTY CALIBRATE SW3 LED2 LED3 FULL EMPTY CALIBRATE SW3 LED2