Owner`s manual

8
DISPLAY, FUNCTIONS AND OPERATIONS
1. FUNCTIONS:
The front panel of the CDP-1.5 has eight buttons that perform all the basic necessary functions.
The remote control contains all the basic functions found on the front panel (except the LOAD and
POWER buttons) as well as all advanced programming features.
POWER: Press this button to turn the unit ON or OFF.
LOAD: Press this button once to open the disk tray. Pressing it again will close the tray.
PREVIOUS (½): Pressed once during playback, the CDP-1.5 will start playing the previous track.
Pressing it sequentially will cause the CDP-1.5 to go back one track each time it is pressed. This button
is also used to select tracks to play and program into memory.
NEXT (¾): Each time this button is pressed, the CDP-1.5 will advance one track i.e. press it twice to
advance two tracks, three for three tracks, etc. If pressed during playback, the CDP-1.5 resumes playing
from the desired track. If pressed while stopped, the CDP-1.5 will await further commands.
PLAY/PAUSE: Press this button to start playback. Pressing it again will pause the music until it is
pressed once more.
FORWARD (») AND REVERSE («) SEARCH: The CDP-1.5 employs a convenient 2-speed search.
These buttons allow you to quickly search through the disk in both directions. Press and hold down the
desired SEARCH button. The time counter will approximately double in speed, and the track heard will
be reduced in volume. Once the desired point is reached, release the SEARCH button, playback will
resume.
If the SEARCH button is held for more than 4 seconds, the CDP-1.5 goes into a high-speed search
mode, and the time counter advances very rapidly. During high-speed search, the volume is completely
muted.