Owner`s manual

ENGLISH

3 Input Selection

These Up and Down arrow keys will cycle through the active inputs on

your CP-500.

If you have inputs you are not using, we suggest deactivating them in order

to provide faster, easier access to the inputs you are actually using. (See the

section The Menu System for information on how to do this.)

4 System Controls

The CP-500 remote control can also control user-de–ned functions as well

as the volume and mute functions of a Classé system.

• F1/F2/F3/F4 keys are available for controlling aspects of the

CP-500 not covered by the other buttons on the remote control.

You are able to choose what the CP-500 should do in response

to receiving the infrared signal that a particular Fkey has been

pressed. The list of possible functions is quite extensive, and

is found in the menu system (see the the next section in this

manual, entitled The Menu System).

Note: The Fkeys on all Classé remote controls issue the same

infrared commands. This saves you from having to be

sure you have picked up the proper remote, since all your

Classé remotes will perform the same function for each

Fkey.

• Volume Up, Volume Down, and Mute do what you would

expect them to do.

• The

Bal (balance) key takes you directly to the balance screen

in the menu system; once there, you can use the navigation keys

on the remote to select either the left or right buttons on the

LCD touchscreen, depending on which way you wish to move

the balance. Adjust the relative left-right balance of the system

by using the Enter key on the remote to ≈press∆ the appropriate

button on the display.