Operating instructions

5
Voltage:The CRCD is factory set for voltages specific to the
mains supply in the country it will be used in.
· 230V for countries with mains supplies between 207V-253V.
· 115V for countries with mains supplies between 103V-126V.
· 100V for countries with mains supplies between 90V-110V.
Replacing the fuses
Before replacing the fuse identify the correct fuse for your local
voltage:
• 100V: T6.3A
• 115V: T6.3A
• 230V: T3.15A
The fuse compartment is on the mains inlet module.
Disconnect the mains supply by removing the IEC mains cable from
the mains inlet module. Using a flat blade screwdriver remove and
replace the fuse. If the fuse blows a second time there is a fault in
the product. Contact your local retailer.
Grounding.
This product must be grounded, Use the three wire moulded mains
lead supplied. Never use an ungrounded plug or adaptor.