Instruction manual

100 Concerto — Instruction Manual
Section 3 — Control System Configuration
Matrix Controller System Configuration
The Matrix Controller System Configuration web page allows you to enter
descriptive information for the Concerto device, adjust serial port settings,
and select control options.
Figure 60. Matrix Controller System Configuration Web Page
System Parameters
The screen section allows descriptive information for the Concerto device,
including name, asset tag, and location.
Serial Port Configuration
Control settings for the console and external serial ports are available in this
screen section.
Control Options
Standard, Standalone, and Native Protocol settings are available. Most Concerto
systems will run under Standard Control. Standalone and Native Protocol
settings are used when the Concerto system is directly controlled by an
automation system or other external control point.
If
Standalone is selected, additional settings become available on the Local
Control web page (see Figure 76 on page 121).