Instruction manual

Concerto — Instruction Manual 107
SMS7000 Control System Configuration
Specifying the Concerto Matrix frame type enables the Concerto Frame Boards
button above the
Frm column. Click the number in the Slice column to select
the slice you’re configuring. Then click the
Boards button to open the Boards
for Slices
n dialog box (Figure 67).
Figure 67. Boards for Slices Dialog
In the Boards in Frame column on the left, select the board(s) you want in this
slice. All of the boards in a slice must be contiguous and compatible, but not
necessarily identical (Analog Audio and Digital Audio modules can be in
the same slice, also Digital Video and HD Video can be in the same slice).
Click the
Add >> button or use the Add All button as appropriate. For more
information on slices and the types of boards that can be included in a slice,
see Optimum Matrix Configurations on page 26. You can also use the
Remove
buttons to change your mind. The
Boards in Exp Frame section of this dialog
is reserved for future use. Click the
OK button to finalize your choices.
A slice must be created for each signal type. T
o create additional slices click
on the first column to highlight it (see Figure 68), then press
i to insert a row,
a to append a row, or d to delete a row.
Figure 68. Managing Slices