Instruction manual

Concerto — Instruction Manual 109
AES Attributes
AES Input Attributes
1. Click the Input Attrib Info button to open the AES Input Attributes dialog.
Figure 70. AES Input Attributes
CH1
CH1
CH2 CH2
Normal
Left Channel
Right Channel
CH1
CH2
Left Only
Right
Left CH1
CH2Left
CH1
CH2
Right Only
Right
Left CH1
CH2
Right
CH1
CH2CH2
CH1
Swap
Right
RightLeft
Left
CH1
CH2
Sum
Right
Left CH1
CH2
Left & Right
Left & Right
7103_01_01_r0
Use this dialog to assign Attribute and Invert options individually, in
groups, or by using the
All buttons. Asynchronous Input (or output) is not
supported by Concerto.
Attributes affect the way signals
are routed through a matrix. Table 43
defines how each setting affects the signals.
Table 43. AES Input Attribute Options
Attribute Definition 100 Hz (Right) 1000 Hz (Left)
0 Normal Defaults are assigned to all Inputs. 100 Hz 1000 Hz
1 Right Only Right Channel Audio will be routed
to the assigned Input. 100 Hz 100 Hz
2 Left Only Left Channel Audio will be route
d to the assigned Input. 1000 Hz 1000 Hz
3 Sum Frequencies of the Right and left
Channel are added together. 1000 Hz +100 Hz 1000 Hz +100 Hz
4 Swap Left and Right Channels are swapped. 1000 Hz 100 Hz
5 Bypass Not supported by Concerto configurations.
6 Async Available only for 7500 matrices.
7 Mute AES silent output. Available only
for Concerto.