Instruction manual

110 Concerto — Instruction Manual
Section 3 — Control System Configuration
Figure 71. AES Input Inverts
CHA
CHA
CHB CHB
None
Left Channel
Right Channel
Invert Channel A
CHA
CHA
CHB CHB
Right Channel
Invert Channels A & B
CHA
CHA
CHB CHB
Invert Channel B
CHA
CHA
CHB CHB
Left Channel
7103_01_02_r0
Invert options assign the invert (opposite logic state) of the signal to an
Input using the settings in Table 44.
Table 44. AES Invert Options
Attribute Definition
0 None Signal is not changed.
1 Channel A Channel A audio is inverted.
2 Channel B Channel B audio is inverted.
3 Both A & B Channel A and Channel B audio is inverted.
Async Asynchronous signals are routed in 7500
matrices
. Not supported by Concerto.
2. After assigning the Input attributes, click OK to finalize your settings.