Instruction manual

120 Concerto — Instruction Manual
Section 3 — Control System Configuration
Native Protocol Configuration
Note The Concerto Native Protocol feature is intended for third party developers.
Existing customers should use Standard Control on their Encore systems.
Concerto software versions 1.7.5 and newer support Native Protocol (NP)
Index commands. Concerto web pages have settings for local configuration
if NP is used. A Concerto matrix can now operate under
Standard Control,
operate only with NP (
Standalone control option), or both standard and NP
control (
Allow Native Protocol Control). These settings are selected with the
Control Options located on the Concerto System Configuration web page
(Figure 75).
Figure 75. Concerto Standalone Control Setting.
If the Local Control setting is selected and saved, the Concerto Local Config-
uration web page is available that all
ows local matrix configuration
(Figure 76).