Instruction manual

Concerto — Instruction Manual 121
Native Protocol Configuration
Figure 76. Concerto Local Configuration.
The Local Control settings required depend on the what Concerto hard-
ware modules are installed and your spec
ific facility requirements.
Local Configuration Example
The following procedure can be used to configure a Concerto SD video
128x128 matrix for standalone operation using Native Protocol:
Activate Standalone Control
1. Select the Concerto Matrix System web page from the links on the left side
of the main web page.
2. Under Control Options select the Standalone Control radio button.
3. Click the Save New Settings button at the bottom of the page.