Instruction manual

122 Concerto — Instruction Manual
Section 3 — Control System Configuration
Locally Configure the Concerto Matrix
1. From the links on the left side of the main web page select the
Local Configuration page.
2. For a 128x128 Concerto matrix, under Local Configuration / Physical Matrix
Count
select the 1 radio button. Configuration items for one matrix will
appear.
3. Under Video Reference Standard select the standard you will be using
(NTSC or PAL).
4. For Matrix # select 0 and for Type (assuming SD video) select Concerto SD.
5. Under Board Slot Usage select all four slots.
6. Now check the Reset Controller box and then click the Save New
Configuration
button at the bottom of the page.
After the Concerto Controller resets the Concerto Matrix should be able to
be controlled via Native Protocol.