Instruction manual

144 Concerto — Instruction Manual
Appendix A — Specifications
TimeCode and Port
Table 63 contains the specifications for the TimeCode and Port modules.
Table 63. TimeCode and Port
Power Requirements
32x32 (per module) < 30 W
Ports
Format RS-422/485
Voltage 1.5 V minimum with full 54 ohm loads
Connectors TimeCode Terminal Block and 50 pin D (on balanced, n
on-transformer backplanes
Port 9 pin D
Impedance Port 120 ohms
Inputs 600 ohms
Outputs 120 ohms
Mechanical and Power Specifications
Table 64 contains the specifications for the physical matrix.
Table 64. Mechanical and Power Specifications Maximum Configuration
Component Depth
a
Allow a minimum of four inches behind the frames for cabling
a
4 RU Concerto frame 483 mm
19 in.
483 mm
19 in.
178 mm
7 in.
15.88 kg.
35 lbs.
4
100-240 V AC or
36-60 V DC
±250 W
7 RU Concerto frame 483 mm
19 in.
483 mm
19 in.
312 mm
12.25 in.
27.22 kg.
60 lbs.
7
100-240 V AC or
36-60 V DC
±400 W
8 RU Concerto+ frame 546 mm
21.5 in.
483 mm
19 in.
356 mm
14 in.
31.75 kg.
70 lbs.
8
100-240 V AC or
36-60 V DC
±600 W
Output voltage Balanced 3 V (nominal)
Unbalanced 1 V p-p (nominal)
Output jitter <1 nSec
Power Requirements
128x32 Digital Audio module 35 W (per module)
Width Height Weight Rack Units Voltage Input
Power Consumption
(Maximum)
Table 62. Digital Aud
io AES - (continued)